News

This official Silverback video demonstrates how the SRS buttplate length is adjusted by removing the existing spacer arrangement, changing the buttplate spacer(s), and refitting the buttplate. It is useful when you need to follow the SRS-A1 or SRS-A2 adjustment sequence shown in the footage, including the final trigger position that locks the spring in place.

The official Silverback SRS barrel swap video demonstrates how the barrel is released, removed and replaced, then secured again at the stock side. This guide is useful when following that short visual procedure for an SRS-A1 or SRS-A2, especially when you need to match the receiver shown on screen to the correct torque value before the final tightening step.

This official Silverback video demonstrates how to adjust piston-sear height on an SRS from Model 2017 onward. The guide is useful when the rifle shows slamfiring or a long, heavy trigger pull, and follows the footage from opening the stock through adjustment, screw placement, torque and the final function check.

Silverback’s official video demonstrates how the variable mass piston is assembled, adjusted with different flyweight combinations, and fitted to an SRS pull-bolt system. This guide is useful when you need to follow the filmed assembly sequence and then use Silverback’s mass-and-energy chart without overlooking the required velocity test and calibration changes.

This official Silverback video demonstrates how to swap the follower in an SRS magazine, from opening the magazine through refitting the spring and closing the assembly. Use this guide when you need a concise visual reference for identifying the original follower, comparing it with the red replacement follower, and following the sequence shown in the footage.

This official Silverback video demonstrates the FAST hop-up assembly for an SRS airsoft replica, from the laid-out chamber parts to the completed chamber at the outer barrel. Use this guide when you need to follow the same visual sequence and identify how the internal pieces, green hop rubber, retaining screws and barrel assembly come together.

This official Silverback video demonstrates the installation sequence for the FAST hop-up and barrel spacers on an SRS carbon outer barrel. Use this guide when you need to follow the visual order from marking the inner barrel, through spacer placement and barrel insertion, to assembling the FAST hop-up chamber and completing the outer-barrel assembly.

This official Silverback video demonstrates the assembly sequence for an SRS carbon outer barrel, barrel spacers and the standard hop-up unit. It is useful when you need to compare the temporary guide bands, spacer placement, chamber alignment and retaining-screw installation with the filmed checkpoints, while keeping the three carbon-barrel length options in view.

This official Silverback video demonstrates how to time a DTSS muzzle brake so the barrel assembly, muzzle brake and dummy sound suppressor align correctly. Use this guide when you need to follow the video’s visual sequence: mark the existing position, transfer the angle to the printed timing chart, choose transparent shims, then confirm the finished orientation with the red alignment tool.