{"title":"Pistol Platforms","description":"\u003cp\u003eExplore the Stalker pistol lineup, featuring specialized platforms like the AAP-01, MK23, and Hi-Capa. These airsoft pistols are designed for precision, reliability, and tactical versatility. Whether you prefer gas blowback or high-pressure air systems, find the perfect sidearm to complement your loadout and enhance your performance on the field.\u003c\/p\u003e","products":[{"product_id":"stalker-u-hop-bucking-80-magenta","title":"MWS U-Hop Bucking 80º (Magenta)","description":"\u003cp\u003e\u003cstrong\u003eSTALKER MWS U-Hop Bucking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stalker MWS U-Hop bucking is designed to fit the TM MWS perfectly.\u003c\/p\u003e\n\u003cp\u003eIt is important to have the correct bucking inlet size to prevent the nozzle from being too tight and getting stuck in the bucking. If your nozzle remains stuck in the bucking for too long while the gun is cycling, the timing of the entire cycling system is altered, resetting the gun to load and fire another BB. To achieve the best cycling and feeding performance for your system, we recommend using this specific bucking for your airsoft gun.\u003c\/p\u003e\n\u003cp\u003eThe U-Hop features the same internal patch as the famous SR-Hop bucking, but the U-Hop offers a greater maximum adjustment range and therefore works better with nubs that move vertically over the bucking, as found in most TDC hop-up units.\u003c\/p\u003e\n\u003cp\u003eIt features balanced material properties, patch design, and adjustment for optimal BB flight performance. We wanted to achieve the longest possible contact patch, so we extended the front section of the hop patch, as shown in the product photos. This shape is a “U,” which is why we call this rubber a “U-Hop” bucking. We are very grateful to the people who tested this product and hope the community enjoys it as much as we do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves cycling time and reduces rapid semi-auto firing and feeding issues.\u003c\/li\u003e\n\u003cli\u003eIncreases range.\u003c\/li\u003e\n\u003cli\u003eImproves accuracy.\u003c\/li\u003e\n\u003cli\u003eEnhances BB flight trajectory.\u003c\/li\u003e\n\u003cli\u003ePerforms well in both cold and warm temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui MWS\u003c\/li\u003e\n\u003cli\u003eMay fit other airsoft guns, sniper rifles, GBB hop-up units, and MWS clones.\u003c\/li\u003e\n\u003cli\u003eBridge-less inner barrels that accept VSR\/GBB\/Pistol-type buckings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColors and hardness:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreen 40 Shore\u003c\/li\u003e\n\u003cli\u003ePink 50 Shore\u003c\/li\u003e\n\u003cli\u003ePurple 60 Shore\u003c\/li\u003e\n\u003cli\u003eOrange 70 Shore\u003c\/li\u003e\n\u003cli\u003eMagenta 80 Shore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550741033301,"sku":"SP-STAL-ST-BUCK-019","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-1_d6d0bfc5-e5ac-4cd8-82d0-9c98601ecb5c.webp?v=1771973132"},{"product_id":"kraken-u-hop-bucking-aap-01","title":"Kraken U-Hop Bucking AAP-01","description":"\u003cp\u003eThe STALKER Kraken U-Hop Bucking is designed for the AAP-01 and AAP-01C models, engineered to perform optimally with both standard and CowCow nozzles. It ensures the blowback unit closes completely, preventing timing issues caused by diameter differences between nozzles.\u003c\/p\u003e\u003cp\u003eFeaturing the same internal patch as the SR-Hop but with a greater adjustment range, the U-Hop shape extends the front section for optimal BB flight. It delivers balanced material properties for improved reload timing, accuracy, and range in various temperatures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproves reload timing and reduces feeding issues\u003c\/li\u003e\n\u003cli\u003eIncreases range and accuracy\u003c\/li\u003e\n\u003cli\u003eEnhances BB flight trajectory\u003c\/li\u003e\n\u003cli\u003ePerforms in cold and warm temperatures\u003c\/li\u003e\n\u003cli\u003eCompatible with standard AAP-01\/AAP-01C hop-ups and Kraken chambers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelectable hardness variants available.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"40° Green","offer_id":52550741328213,"sku":"SP-STAL-ST-BUCK-001","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"50° Pink","offer_id":53961243197781,"sku":"SP-STAL-ST-BUCK-002","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"60° Purple","offer_id":53961243230549,"sku":"SP-STAL- ST-BUCK-003","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"70° Yellow","offer_id":53961243263317,"sku":"SP-STAL-ST-BUCK-004","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"80° Magenta","offer_id":53961243296085,"sku":"SP-STAL-ST-BUCK-017","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_df09d669-c8a4-4a4d-b8e8-4b2fb0c30af9.webp?v=1771973123"},{"product_id":"kraken-c-hop-bucking-aap-01","title":"Kraken C-Hop Bucking AAP-01","description":"\u003cp\u003e\u003cstrong\u003eSTALKER Kraken C-Hop Bucking for AAP-01\u003c\/strong\u003e is designed for AAP-01 and AAP-01C builds using Kraken hop-up chambers, stock AAP-01 chambers, stock AAP-01C chambers, and bridge-less inner barrels that accept VSR\/GBB pistol-style buckings.\u003c\/p\u003e\n\u003cp\u003eThe C-Hop profile uses an internal concave patch for stable BB flight, strong lift and consistent sealing with stock and CowCow nozzles. It is built to improve cycling speed, reduce feeding issues, increase range and improve accuracy in both cold and warm temperatures.\u003c\/p\u003e\n\u003cp\u003eAvailable with selectable hardness variants.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"40° Green","offer_id":52550741393749,"sku":"SP-STAL-ST-BUCK-005","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"50° Pink","offer_id":53961247162709,"sku":"SP-STAL-ST-BUCK-006","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"60° Purple","offer_id":53961247195477,"sku":"SP-STAL- ST-BUCK-007","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"70° Yellow","offer_id":53961247228245,"sku":"SP-STAL-ST-BUCK-008","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"80° Magenta","offer_id":53961247261013,"sku":"SP-STAL-ST-BUCK-018","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_307c62ee-553a-4e0d-b46c-d8181b132385.webp?v=1771973121"},{"product_id":"stalker-aap-01-rmr-mount-kraken-turret","title":"AAP-01 RMR Mount with Turret for Kraken Chamber","description":"\u003cp\u003eThis TDC RMR Red Dot base is designed to be installed directly onto the fixing screw cover plate of the standard Stalker Kraken AAP-01 chamber kit, or onto the steel pillar included in the Kraken AAP-01 Ultimate Kit or the Mini Turret TDC Kit.\u003c\/p\u003e\n\u003cp\u003eIt allows you to mount an RMR red dot sight on the AAP-01 while continuing to use the external hop-up adjustment wheel of the Kraken AAP-01. Essentially, this mount is an all-in-one red dot support with an integrated Mini Turret TDC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe click ball plunger screw comes pre-installed, but you must fine-tune it after installing the mount and the wheel. Use the longer side of an Allen key and turn slowly, try rotating the wheel until it turns and the click ball plunger screw clicks. Do not overtighten!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this TDC RMR Mount kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTDC RMR Base (Made from 3D-printed Acrylonitrile Butadiene Styrene (ABS) Nylon).\u003c\/li\u003e\n\u003cli\u003eTDC adjustment wheel with engraved STALKER logo.\u003c\/li\u003e\n\u003cli\u003eClick ball plunger screw for hop adjustment clicks.\u003c\/li\u003e\n\u003cli\u003eRed Dot Not Included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: You can use the screws from your rear sight to install this RMR mount.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550815220053,"sku":"SP-STAL-ST-AAP-010","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_3bc15b89-8eb5-4b03-989f-4fc034aaa511.webp?v=1771972264"},{"product_id":"stalker-aap-01-tdc-rail-system","title":"AAP-01 Rail with TDC Mount","description":"\u003cp\u003eAAP-01 TDC Rail with integrated TDC Wheel adjustment system and click adjustment system for the AAP-01.\u003c\/p\u003e\n\u003cp\u003eFor example, the AAP-01 TDC Rail can be installed between the Action Army folding stock and the Action Army SMG handguard or other configurations. This system ensures you can adjust the hop-up externally by turning the TDC wheel. It features a built-in click system that clicks and locks the wheel when you adjust it. The AAP-01 TDC Rail wheel can be connected to the pillar of the Stalker AAP-01 Kraken TDC Unit and is designed to work best with this unit, but it can also be used with other units and systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe click ball screw comes pre-installed, but you still need to fine-tune it once you have installed the rail and wheel. Use the longer end of an Allen key and turn slowly. Try rotating the wheel until it turns and the click ball screw engages with a click. Do not overtighten!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes the following products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStalker AAP-01 TDC Rail made from 3D-printed Acrylonitrile Butadiene Styrene (ABS) plastic.\u003c\/li\u003e\n\u003cli\u003eEngraved Stalker TDC Wheel made from stainless steel.\u003c\/li\u003e\n\u003cli\u003eBuilt-in click ball screw that clicks when adjusting the Hop TDC Wheel.\u003c\/li\u003e\n\u003cli\u003eScrew set to secure the TDC Rail onto the AAP-01 airsoft pistol.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550815351125,"sku":"SP-STAL-ST-AAP-011","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_3d01f002-7c25-428d-83bf-066d8a34ac61.jpg?v=1771972262"},{"product_id":"stalker-u-hop-60-bucking-mws-aap-01","title":"MWS \u0026 AAP-01 U-Hop Bucking 60º (Purple)","description":"\u003cp\u003e\u003cstrong\u003eSTALKER MWS U-Hop Bucking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stalker U-Hop bucking is designed to fit the TM MWS in the best possible way! As well as the AAP-01!\u003c\/p\u003e\n\u003cp\u003eIt is important to have the correct inlet size of the bucking to prevent the nozzle from becoming too sticky and getting stuck inside the bucking. If the nozzle remains stuck in the bucking for too long while the pistol is cycling, it changes the timing of the entire recoil cycle movement of all parts, which resets your pistol to load and fire another BB. For the best recoil and feeding timing in your system, we recommend using this specific bucking for your pistol.\u003c\/p\u003e\n\u003cp\u003eThe U-Hop features the same internal patch as the famous SR-Hop bucking, but the U-Hop has a greater maximum adjustment range and therefore works better with nubs that move vertically in the bucking, as found in most TDC hop-up units.\u003c\/p\u003e\n\u003cp\u003eIt offers perfectly balanced properties thanks to its high-quality material, design, and bucking patch adjustment for optimal BB flight trajectory performance. We wanted to achieve the greatest possible lift trajectory from the bucking, so we enlarged the front part of the hop patch, as shown in the product photos. This shape forms a U, which is why we call this bucking a U-Hop. We are very grateful to the people who tested this product, and we hope the community enjoys it as much as we do!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves recoil timing and reduces rapid semi-auto and feeding issues.\u003c\/li\u003e\n\u003cli\u003eIncreases range\u003c\/li\u003e\n\u003cli\u003eIncreases accuracy\u003c\/li\u003e\n\u003cli\u003eImproves BB flight trajectory\u003c\/li\u003e\n\u003cli\u003eWorks in both cold and warm temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui MWS\u003c\/li\u003e\n\u003cli\u003eAction Army AAP01\u003c\/li\u003e\n\u003cli\u003eAction Army AAP01C\u003c\/li\u003e\n\u003cli\u003eMay fit other pistol, sniper rifle, and GBB hop-up units, as well as MWS clones\u003c\/li\u003e\n\u003cli\u003eBridge-less inner barrels that accept VSR\/GBB\/Pistol-type buckings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColor and Hardness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreen 40\u003c\/li\u003e\n\u003cli\u003ePink 50\u003c\/li\u003e\n\u003cli\u003ePurple 60\u003c\/li\u003e\n\u003cli\u003eOrange 70\u003c\/li\u003e\n\u003cli\u003eMagenta 80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550817218901,"sku":"SP-STAL-ST-BUCK-011","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-11_fa39163e-81d1-4a31-b66d-a2061284ea4e.png?v=1771972210"},{"product_id":"stalker-c-hop-60-bucking-aap-01","title":"C-Hop Bucking 60º (Purple) - AAP-01","description":"\u003cp\u003e\u003cstrong\u003eSTALKER AAP-01 C-Hop Bucking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stalker AAP-01 C-Hop bucking is designed to fit the AAP-01 and AAP-01C models, and is specifically engineered to work optimally with both the stock nozzle and the CowCow nozzle, while still allowing your bolt unit to close completely—unlike other buckings when used with the CowCow nozzle. This bolt unit closure issue occurs because the stock nozzle and the CowCow nozzle have different diameters. Therefore, we have designed a bucking that fits both nozzles perfectly and allows the bolt unit to close fully.\u003c\/p\u003e\n\u003cp\u003eIt is important to have the correct bucking inlet size to prevent the nozzle from becoming too sticky and getting stuck inside the bucking. If your nozzle remains stuck in the bucking for too long during cycling, it changes the timing of the entire cycle movement of all loading parts, which resets your pistol before it can load and fire another BB. For the best cycling and feeding timing in your system, we recommend using this dedicated AAP-01 bucking.\u003c\/p\u003e\n\u003cp\u003eThe C-Hop features a concave internal patch similar to the SRS Kraken concave bucking, one of the most widely used buckings in the SRS community. So now we have also made it available for the AAP-01!\u003c\/p\u003e\n\u003cp\u003eThis bucking has perfectly balanced material properties, design, and patch fitment for optimal BB flight trajectory performance. We aimed to achieve the greatest possible lift trajectory from the bucking, so we enlarged the front section of the hop patch, as shown in the product photos. We are very grateful to everyone who tested this product, and we hope the community enjoys it as much as we do!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves cycling timing and reduces rapid full-auto firing and feeding issues.\u003c\/li\u003e\n\u003cli\u003eIncreases range\u003c\/li\u003e\n\u003cli\u003eImproves accuracy\u003c\/li\u003e\n\u003cli\u003eEnhances BB flight trajectory\u003c\/li\u003e\n\u003cli\u003ePerforms well in both cold and warm temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock AAP-01 hop-up unit\u003c\/li\u003e\n\u003cli\u003eStock AAP-01C hop-up unit\u003c\/li\u003e\n\u003cli\u003eMay also fit other pistols, sniper rifles, and GBB hop-up units with unbridged inner barrels that accept VSR\/GBB\/Pistol-type buckings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eColor and Hardness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGreen 40°\u003c\/p\u003e\n\u003cp\u003ePink 50°\u003c\/p\u003e\n\u003cp\u003ePurple 60°\u003c\/p\u003e\n\u003cp\u003eOrange 70°\u003c\/p\u003e\n\u003cp\u003eMagenta 80°\u003c\/p\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550817251669,"sku":"SP-STAL-ST-BUCK-015","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_24d75d47-da96-4596-9f9c-27c1fbdcd4fa.jpg?v=1771972208"},{"product_id":"stalker-mini-tdc-kit-aap-01-non-threaded","title":"TDC Mini Kit AAP-01 (Non-Threaded Version)","description":"\u003cp\u003eThe AAP-01 Mini TDC Kit can be installed on your AAP-01 Assassin receiver and ensures you can adjust the hop-up externally by turning the TDC wheel. It features a built-in click system that gently locks the adjustment wheel once properly set.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed to upgrade your standard Kraken AAP-01 to the ultimate version. The AAP-01 Mini TDC Kit can be connected to the threaded post of the Stalker AAP-01 Kraken TDC Unit and is engineered to work optimally with this unit, as it has the perfect dimensions to control the up\/down pressure adjustment of the Kraken TDC Core inside the hop-up unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes the following products:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStalker Black Mini TDC Turret Base for AAP-01, CNC-machined aluminum\u003c\/li\u003e\n\u003cli\u003eStalker Black TDC Wheel made of stainless steel (STALKER logo engraved)\u003c\/li\u003e\n\u003cli\u003eStainless steel threaded post\u003c\/li\u003e\n\u003cli\u003eIntegrated ball detent screw that clicks when adjusting the TDC Hop Wheel\u003c\/li\u003e\n\u003cli\u003eScrew to secure the Mini Kit to the AAP-01 receiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*The hop-up unit, bucking, and inner barrel are shown for demonstration purposes only and are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStalker has created many other options if you have a different slide or a different AAP-01 build, so check out all available options below.\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC System for the FUKU-2 Slide Rail Click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC System for the AAP-01C Pistol Rail Click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC System for the Black Mamba Rail Click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC System for the TTI PCC Rail Click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550830063957,"sku":"SP-STAL-ST-AAP-008","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_bbd91669-b06d-41b8-9e0f-6a8b8f5c3740.jpg?v=1771972094"},{"product_id":"stalker-kraken-tdc-hop-up-chamber-aap-01-standard","title":"Kraken TDC Modular Hop-Up Chamber AAP-01 (Standard Kit)","description":"\u003cp\u003eWhen building your dream AAP-01 setup, you want something that is compatible with your project. Don’t worry, the Stalker Kraken AAP-01 has everything you need. This Swiss army knife for your AAP-01 can adapt to all types of additional STALKER TDC upgrades to merge perfectly with your dream build.\u003c\/p\u003e\n\u003cp\u003eThe Kraken for the AAP-01 TDC hop-up chamber is probably the most versatile TDC hop-up chamber on the market. There are two different versions of this hop-up: the Standard version and the Ultimate edition.\u003c\/p\u003e\n\u003cp\u003eThis Standard version can be used on its own as a low-profile TDC grub screw unit with an included top cap adjustment screw that can be adjusted using a hex key, or you can combine it with our STALKER Low Profile AAP-01 TDC Mini Kit (sold separately) so the hop can be adjusted via a rotary wheel system. You can also pair it with the STALKER TDC rail kits (sold separately) so the wheel sits between the Stalker rail kits and your hop can be easily adjusted on the fly.\u003c\/p\u003e\n\u003cp\u003eBecause the AAP-01 is a lightweight pistol, we chose to manufacture the hop-up chamber body in stainless steel to balance the weight in the center section of the airsoft gun. Adding weight to your airsoft gun to balance blowback recoil—especially in a polymer-framed pistol—is nothing new in the competitive shooting world. We thought it would be great to balance the blowback recoil while maintaining the AAP-01’s accuracy. Additionally, unlike aluminum chamber bodies, the hop-up unit body will not wear out from screw threads or drilling bits! Extremely durable!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included in this Kraken AAP-01 TDC Standard Chamber package?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1x Kraken 60° U-Hop AAP-01 specific Bucking (see info here) for standard nozzle and CowCow nozzle\u003c\/p\u003e\n\u003cp\u003e1x Kraken AAP-01 aluminum chamber head part\u003c\/p\u003e\n\u003cp\u003e1x Kraken AAP-01 stainless steel chamber body part\u003c\/p\u003e\n\u003cp\u003e1x CNC aluminum hop-up plate\u003c\/p\u003e\n\u003cp\u003e1x Chamber top cap for grub screw adjustment\u003c\/p\u003e\n\u003cp\u003e1x Chamber top cap retaining screw\u003c\/p\u003e\n\u003cp\u003e1x Flat-bottom hop adjustment grub screw for the top cap Various body screws to assemble the hop-up, inner barrel, and top cap\u003c\/p\u003e\n\u003cp\u003e*Inner barrel and slide are included for demonstration purposes only and are not included.\u003c\/p\u003e\n\u003cp\u003e((((INSTALLATION VIDEO COMING SOON))))\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eIncreases range\u003c\/p\u003e\n\u003cp\u003eIncreases accuracy\u003c\/p\u003e\n\u003cp\u003eImproves BB flight trajectory\u003c\/p\u003e\n\u003cp\u003eAdds hop adjustment via Allen key from the top of your AAP-01 or a surface-mounted click wheel function using the supplied wheel and TDC mini turret\u003c\/p\u003e\n\u003cp\u003eCompatibility After the release of the TDC chamber, many accessories will be produced for different upper assemblies.\u003c\/p\u003e\n\u003cp\u003eWorks on AAP-01 (Low Profile Mode and TDC Mini Turret Mode, with all accessories except the spider clamp)\u003c\/p\u003e\n\u003cp\u003eWorks on AAP-01C (Low Profile Mode or AAP-01C Spider Clamp)\u003c\/p\u003e\n\u003cp\u003eWorks on AAC Black Mamba A\u0026amp;B Kit (Low Profile Mode or Black Mamba Spider Clamp)\u003c\/p\u003e\n\u003cp\u003eWorks with AAC SMG Handguard and Stock\u003c\/p\u003e\n\u003cp\u003eWorks on CTM FUKU-2 Short Slide (Low Profile Mode or FUKU-2 Spider Clamp)\u003c\/p\u003e\n\u003cp\u003eWorks on CTM FUKU-2 Long Slide (Low Profile Mode or FUKU-2 Spider Clamp)\u003c\/p\u003e\n\u003cp\u003eWorks on TTI PCC Kit (Requires separate Stalker PCC Hop Spacer)\u003c\/p\u003e\n\u003cp\u003eWorks on TTI Mini Mamba Upper (Low Profile+Wheel Mode or TTI Mamba Spider Clamp)\u003c\/p\u003e\n\u003cp\u003eWorks on TTI Scorpion Upper (Low Profile+Wheel Mode or TTI Scorpion Spider Clamp).\u003c\/p\u003e\n\u003cp\u003eStalker has created many other options if you have a different slide or AAP-01 configuration, so check all the options below.\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC system for the FUKU-2 slide, click \u0026gt;\u0026gt;\u0026gt;HERE\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC system for the AAP-01C pistol rail, click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC system for the Black Mamba rail, click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e\n\u003cp\u003eIf you want a TDC system for the TTI PCC wheel, click \u0026gt;\u0026gt;\u0026gt;Coming Soon\u0026lt;\u0026lt;\u0026lt;\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550830096725,"sku":"SP-STAL-ST-AAP-006","price":64.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_0d608440-7881-407f-9aaa-5e8b507337f6.webp?v=1771972091"},{"product_id":"stalker-morpheus-dual-bore-84mm-inner-barrel-aap-01","title":"Morpheus Dual Bore Hybrid Barrel 84mm AAP01C\/G-Series","description":"\u003cp\u003e\u003cspan\u003eThe Stalker \"\u003cstrong\u003eMorpheus\u003c\/strong\u003e\" 6.05 Dual Bore Hybrid Barrel is designed to offer the airsoft community one barrel to rule them all. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Morpheus Hybrid Barrel is made from highly durable SUS304 stainless steel and features a Dual Bore tapered end-crowning to enhance your range and accuracy. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe use stronger and more durable SUS304 seamless steel to raise the bar. Most brands use SUS303 seamed steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is reduced due to its composition, as it is optimized for machinability. In contrast, SUS304 steel is more difficult to machine but offers greater durability and excellent corrosion resistance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis barrel features an enlarged, unbridged window and is a cross-platform barrel compatible with most AEG, GBB, or sniper rifle platforms. It includes all the common side cuts to ensure compatibility with a wide range of airsoft replicas, as well as Action Army hop-up side cuts. Pairing this barrel with popular VSR buckings is no problem, and the Morpheus R-Hop will be available soon. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAEG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGBB (Check the slots in the photo to confirm if your GBB rifle is compatible with this barrel)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVSR \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSRS \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBarrel Specifications: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBarrel Material: Cold-forged seamless SUS304 stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner Diameter: 6.05mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarrel End-Crown Diameter: ~7.80\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSurface Treatment \u003c\/span\u003e\u003cspan\u003eTolerance Quality: 0.001 millimeter class accuracy\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor more information about Stalker products, tech, and crafting guides, please visit: \u003ca href=\"http:\/\/www.stalkerairsoft.com\" target=\"_blank\" rel=\"noopener\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550839173461,"sku":"SP-STAL-ST-MORP-AAP01C-84","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_e85e8d6e-2014-40dc-9f80-1b0876d1fb02.jpg?v=1771971952"},{"product_id":"action-army-aap-01c-assassin-gbb-pistol","title":"AAP-01C Assassin GBB Full Auto \/ Semi Auto (Black)","description":"\u003cp\u003eThe AAP-01 is one of the best-selling airsoft pistols, and now we present the AAP-01C, the more compact version of the AAP-01.\u003c\/p\u003e\n\u003cp\u003eThis pistol is compact and features an integrated rail system for mounting various aiming devices, as well as a built-in fire selector to switch from semi-automatic to full-auto in no time. This lightweight and compact polymer pistol is an excellent choice as a secondary weapon for airsoft snipers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact version of the AAP-01 pistol\u003c\/li\u003e\n\u003cli\u003eBuilt-in, easy-access fire selector – semi-automatic \/ full-auto pistol\u003c\/li\u003e\n\u003cli\u003eIntegrated rail system for mounting aiming devices Front and rear fiber optic sights\u003c\/li\u003e\n\u003cli\u003eCompatible with Action Army AAP-01 magazines and TM-spec G Series magazines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: All AAP-01 series pistols come with the hop-up unset. The hop-up must be adjusted out of the box, as BBs will generally exit the barrel without any hop effect applied.\u003c\/p\u003e","brand":"Action Army","offers":[{"title":"Default Title","offer_id":52550839763285,"sku":"SP-AAC-AAP-01C - BK (SMALL VERSION)","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_6f51678f-7387-4f00-9341-7751a340dff1.webp?v=1771971945"},{"product_id":"skirmshop-spain-aap-01-full-upgrade-fde","title":"AAP01 UpgraDeadA - Full Auto \/ Semi Auto (FDE)","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Upgrade Kit for your AAP01 to turn your pistol into a beast. This upgrade kit makes your AAP01 accurate, consistent, and capable of a high rate of fire. The package includes the following Stalker upgrades, installed by our gunsmith and ready to play!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe package includes the following products.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/action-army-aap-01-gbb-full-auto-semi-auto-fde.html\"\u003eAAP01 GBB Full Auto \/ Semi Auto (FDE)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/aap-01-tdc-prowler-hop-plate.html\"\u003eAAP-01 - TDC + Prowler Hop Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/en\/aap-01-ultimate-spring-set-8pcs.html\"\u003eAAP-01 Ultimate Spring Set (8pcs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/morpheus-dual-bore-barrel-129-mm.html\"\u003e\"Morpheus\" Dual Bore Inner Barrel (129 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/goma-sr-hop-60o-morada-para-vsrssg-10gbbpistol.html\"\u003eSR Hop Bucking 60º (Purple) - for VSR\/SSG-10\/GBB\/Pistol\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/official-logo-patch.html\"\u003eOfficial Logo Patch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/montaje-de-replica.html\"\u003eReplica assembly and mounting service included\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe pre-upgraded pistol is built to order and may take up to 3 days to assemble, after which it will be shipped to you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct descriptions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAction Army AAP01:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe AAP01 is a blend of the legendary Ruger-style pistol with a modern design and compatibility with G17 series magazines. The upper and lower receiver are made of durable polymer with metal inserts for the operating components.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe lightweight bolt and short-stroke action system provide the user with a satisfying amount of felt recoil, as well as a fast cycle that is ideal for engaging multiple targets not only in tactical scenarios but also in sport shooting competitions. The selector switch is accessible after pulling the bolt back.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker AAP01 - TDC + Prowler Hop Plate:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis kit removes all standard hop-up components and replaces them with a TDC hop-up function in the stock AAP-01 hop-up chamber.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis set contains a printed TDC cap (ABS) with a grub screw and a specially designed pressure plate for your AAP-01, allowing you to adjust your hop-up from the top using a hex key. The vertically finished grub screw presses vertically onto the included Prowler hop plate, providing the best pressure point from true top dead center (TDC).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe red CNC aluminum Prowler nub on this hop plate has the same shape and finish as the well-known purple nub we offer in the SRS Kraken series. This nub shape has received excellent feedback, so we offer the same shape for a perfect setup in your AAP-01.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker AAP01 Spring Kit (8 pieces):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis set includes four different recoil springs and four different nozzle return springs to fine-tune your AAP-01 into a monster.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGreen gas, HPA, drum magazines, short magazines, long magazines, short-stroke kit, etc. There are countless possible AAP-01 configurations, and we noticed that each setup behaves differently. Temperature conditions also play an important role in how your AAP-01 performs, so we decided to release the ultimate eight-spring set so you can tune your AAP-01 depending on the parts and gas you use and the temperature conditions where you play.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker Morpheus 129MM Inner Barrel for AAP01:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cem\u003eThe Morpheus Hybrid Barrel is made of highly durable SUS304 stainless steel and features a dual-diameter tapered end to improve your range and accuracy.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWe use seamless and more durable SUS304 stainless steel because we wanted to raise the bar a bit. Most brands use welded SUS303 stainless steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is reduced due to its composition, as it is specialized for machining. Therefore, the SUS304 steel we use is harder to machine but more durable and offers excellent corrosion resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker SR-Hop Bucking:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Stalker SR-Hop bucking is designed as a hybrid between an R-Hop bucking with an extended front section. It features perfectly balanced material properties, design, and patch fit for optimal BB flight trajectory performance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have any issues or questions about this or other Stalker products, please visit our Stalker owners group on Facebook here: \u003ca href=\"https:\/\/www.facebook.com\/groups\/329589544772075\/\" target=\"_new\"\u003ehttps:\/\/www.facebook.com\/groups\/329589544772075\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and information on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: \u003ca href=\"https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\" target=\"_new\"\u003ehttps:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003c\/a\u003e Instagram: \u003ca href=\"https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\" target=\"_new\"\u003ehttps:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003c\/a\u003e Youtube: \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\" target=\"_new\"\u003ehttps:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, tech guides, and craftsmanship, visit: \u003ca href=\"http:\/\/www.stalkerairsoft.com\/\" target=\"_new\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eYou can find more information about why we require personal information to purchase airsoft guns here.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skirmshop Spain","offers":[{"title":"Default Title","offer_id":52550843892053,"sku":null,"price":224.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-11_894992f7-caad-4e79-87c8-7eca232347a9.jpg?v=1771971798"},{"product_id":"stalker-morpheus-inner-barrel-113mm","title":"Morpheus Dual Bore 113mm Hybrid Barrel","description":"\u003cp\u003e\u003cspan\u003eThe Stalker \"\u003cstrong\u003eMorpheus\u003c\/strong\u003e\" 6.05 Dual Bore Hybrid Barrel is designed to offer the airsoft community one barrel to rule them all. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe Morpheus Hybrid Barrel is made out of very durable SUS304 Stainless Steel and has a Dualbore tapered end-crowning to upgrade your range and accuracy. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWe used the more durable and stronger SUS304 seamless Steel because we wanted to step up the game a bit. Most brands use SUS303 seamed steel because it's easier to machine. SUS303 stainless steel's corrosion resistance is weakened due to its composition as it's specialized for machinability so the SUS304 steel we use is harder to machine but more durable and has wonderful corrosion resistance. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThis barrel has an enlarged, unbridged window and is a cross platform barrel so it fits most AEG, GBB, or Sniper Rifle platforms. It has all the famous side cuts to be accepted in a lot of Airsoft guns, aswell as the Action Army Hopup sidecuts. Combining this barrel with famous VSR buckings is no problem and the Morpheus Rhop will be available soon. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis barrel fits in the following airsoft systems and all other systems that accept these barrels:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eAEG\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eGBB (Check Slots on Photo if you're GBB Rifle is acompatible with this barrel)\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eVSR \u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eSRS \u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBarrel Specs: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eBarrel Material: Cold Forged Seamless SUS304 Stainless Steel Barrel\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eInner diameter: 6.05mm\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eBarrel End-Crown Diameter: ~7.80 \u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan\u003eSurface Treatment \u003c\/span\u003e\u003cspan\u003eTolerance Quality: 0.001 Milimeter Class Accuracy\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003eFor more information about Stalker Products,  Tech \u0026amp; Crafting Guides Please Visit: \u003ca href=\"http:\/\/www.stalkerairsoft.com\" target=\"_blank\" rel=\"noopener\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550848807253,"sku":"SP-STAL-ST-MORP-113","price":37.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_82faaa63-9baa-49e2-8e55-f519a18f89b6.jpg?v=1771971704"},{"product_id":"stalker-morpheus-inner-barrel-180mm","title":"Morpheus Hybrid Dual Bore Barrel 180mm","description":"\u003cp\u003e\u003cspan\u003eThe Stalker \"\u003cstrong\u003eMorpheus\u003c\/strong\u003e\" 6.05 Dual Bore Hybrid Barrel is designed to offer the airsoft community one barrel to rule them all. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Morpheus Hybrid Barrel is made out of very durable SUS304 Stainless Steel and has a Dualbore tapered end-crowning to upgrade your range and accuracy. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe used the more durable and stronger SUS304 seamless Steel because we wanted to step up the game a bit. Most brands use SUS303 seamed steel because it's easier to machine. SUS303 stainless steel's corrosion resistance is weakened due to its composition as it's specialized for machinability so the SUS304 steel we use is harder to machine but more durable and has wonderful corrosion resistance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis barrel has an enlarged, unbridged window and is a cross platform barrel so it fits most AEG, GBB, or Sniper Rifle platforms. It has all the famous side cuts to be accepted in a lot of Airsoft guns, aswell as the Action Army Hopup sidecuts. Combining this barrel with famous VSR buckings is no problem and the Morpheus Rhop will be available soon. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis barrel fits in the following airsoft systems and all other systems that accept these barrels:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAEG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGBB (Check Slots on Photo if you're GBB Rifle is acompatible with this barrel)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVSR \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSRS \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBarrel Specs: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBarrel Material: Cold Forged Seamless SUS304 Stainless Steel Barrel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner diameter: 6.05mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarrel End-Crown Diameter: ~7.80 \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSurface Treatment \u003c\/span\u003e\u003cspan\u003eTolerance Quality: 0.001 Milimeter Class Accuracy\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFor more information about Stalker Products,  Tech \u0026amp; Crafting Guides Please Visit: \u003ca href=\"http:\/\/www.stalkerairsoft.com\" target=\"_blank\" rel=\"noopener\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52550848905557,"sku":"SP-STAL-ST-MORP-180","price":49.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_dc46dff6-2482-4f04-90c8-a48ad8244fca.jpg?v=1771971701"},{"product_id":"tokyo-marui-g-series-17-gbb-pistol","title":"G Series 17 Gen.3 GBB","description":"\u003cp\u003eThis airsoft pistol replica is inspired by the design of the original Glock 17 and is compatible with holsters designed for this model. This airsoft gun is one of the most highly regarded replicas worldwide, presented here in its 17 version. The Tokyo Marui G17 features unmatched design and build quality, making it highly sought after among airsofters and IPSC shooters. It has lower gas consumption than other equivalent replicas, and its accuracy and reliability are outstanding. Although it does not have an official Glock license, it is commonly known among players as \"Tokyo Marui’s Glock 17.\"\u003c\/p\u003e\n\u003cp\u003eIts operation is exceptionally smooth. The use of summer gas (134a or 144a) or medium gas is recommended, but winter gas is not advised as it provides too much pressure for proper operation of this Tokyo Marui Glock-style pistol.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eReplica type: GBB pistol\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplica series: inspired by the Glock 17 design\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFrame material: reinforced polymer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSlide material: reinforced polymer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRails: yes, 1 Picatinny rail under the barrel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBlowback: yes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRecoil: yes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFPS: ~300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLength: 185mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInner barrel length: 97mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWeight: 705g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdjustable hop-up (accessible by removing the slide)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eColor: black\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse of summer gas (144a or similar) is recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with equivalent KJ Works and WE magazines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMagazine capacity: 25+1 6mm BBs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIncludes gas magazine and night sights (not installed; included in a small box alongside the replica)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tokyo Marui","offers":[{"title":"Default Title","offer_id":52550858473813,"sku":"SP-TM-06.1","price":164.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/tokyo-marui-glock-17-gen4-gbb-5.png?v=1771971546"},{"product_id":"ctm-aap-01-frame-fuku-2-black-red","title":"AAP-01 Frame FUKU-2 Black\/Red","description":"\u003cp\u003e\u003cstrong\u003eAAP-01 Frame FUKU-2 Black\/Red\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: nylon + fiberglass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003cbr\u003e· Frame * 1 piece\u003cbr\u003e· Grips *2 pcs.\u003cbr\u003e· Release button * 1 piece\u003cbr\u003e· Hexagon socket head bolt M3*4 *4 pieces\u003cbr\u003e· Hexagon truncheon head bolt M2.5 *1 pc.\u003c\/p\u003e\n\u003cp\u003eHardware accessories, such as the original trigger and other internal parts seen in this image are NOT included in the product.\u003c\/p\u003e","brand":"CTM","offers":[{"title":"Default Title","offer_id":52550859522389,"sku":"SP-CTM-40","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/screenshot-2023-01-19-at-115620_c4235b61-2905-4ebe-a125-0cb8ba923bf6.png?v=1771971525"},{"product_id":"stalker-aap01-military-grade-screws","title":"AAP01 Military Grade Screws","description":"\u003cp\u003eThis set contains upgraded high-grade A4 stainless steel screws for the AAP-01 upper receiver and internal parts.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e2 AAP-01 rear sight screws (black)\u003cbr\u003e2 AAP-01 outer barrel side screws\u003cbr\u003e2 AAP-01 lower outer barrel screws with threadlocker.\u003cbr\u003e4 AAP-01 hop-up screws\u003cbr\u003e2 AAP-01 hop-up nuts.\u003cbr\u003e2 AAP-01 nozzle retention screws with threadlocker.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52551007437141,"sku":"SP-STAL-235","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_4c535eab-75b6-464c-b179-fa142db43802.jpg?v=1771970471"},{"product_id":"maple-leaf-hi-capa-hop-up-chamber","title":"Hi-Capa Hop-Up Chamber for Marui Gas Blowback Pistol","description":"\u003cp\u003eMaple Leaf Hop-Up Chamber for Marui \/ KJ \/ WE Hi-Capa Gas Blowback Pistol\u003c\/p\u003e\u003cp\u003e- Aluminum construction\u003cbr\u003e- Upgraded steel pressure plate\u003cbr\u003e- I-key included\u003cbr\u003e- Suitable for Marui \/ WE \/ KJW Hi-Capa series\u003c\/p\u003e","brand":"Maple Leaf","offers":[{"title":"Default Title","offer_id":52551078379861,"sku":"SP-MAPL-133","price":23.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/ml-high-cappa_558ad490-18ad-4c84-9bfb-28d04c97a711.jpg?v=1771969711"},{"product_id":"stalker-morpheus-inner-barrel-250mm","title":"\"Morpheus\" Dual Bore Hybrid Inner Barrel 250mm","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05 dual bore hybrid barrel is designed to offer the airsoft community one barrel to rule them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered end crown to enhance range and accuracy.\u003c\/p\u003e\n\u003cp\u003eWe use the most durable and robust SUS304 stainless steel because we wanted to step up the game. Most brands use SUS303 steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is reduced due to its composition, as it is optimized for machinability. The SUS304 steel we use is harder to machine but far more durable and offers excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis barrel features an enlarged bridge-less window and is a cross-platform barrel, making it compatible with most AEG, GBB, or sniper rifle platforms. It includes all the popular side cuts to ensure compatibility with many airsoft guns, as well as Action Army hop-up side cuts. Pairing this barrel with popular VSR buckings is not a problem.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (please check the grooves in the photo to confirm your GBB rifle is compatible with this barrel)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel material: Cold hammer-forged seamless SUS304 stainless steel barrel\u003cbr\u003eInner diameter: 6.05 mm\u003cbr\u003eBarrel end crown diameter: ~7.80\u003cbr\u003eSurface treatment tolerance quality: 0.001 millimeter class precision\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, technical guides, and build guides, visit: www.stalkerairsoft.com\u003c\/p\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52551176520021,"sku":"SP-MORP-250","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_7cf5a090-443b-44b6-b5d6-6045920c7129.jpg?v=1771969000"},{"product_id":"skirmshop-aap01-gbb-pistol-full-auto","title":"AAP01 Upgraded - Full Auto \/ Semi Auto (Black)","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Upgrade Kit for your AAP01 to turn your pistol into a beast. This upgrade kit makes your AAP01 accurate, consistent, and capable of a high rate of fire. The package includes the following Stalker upgrades, installed by our gunsmith and ready to play!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe package includes the following products.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/action-army-aap-01-gbb-full-auto-semi-auto-black.html\"\u003eAction Army AAP-01 GBB Full Auto \/ Semi Auto (Black)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/aap-01-tdc-prowler-hop-plate.html\"\u003eAAP-01 - TDC + Prowler Hop Plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/en\/aap-01-ultimate-spring-set-8pcs.html\"\u003eAAP-01 Ultimate Spring Set (8pcs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/morpheus-dual-bore-barrel-129-mm.html\"\u003e\"Morpheus\" Dual Bore Barrel (129 mm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/goma-sr-hop-60o-morada-para-vsrssg-10gbbpistol.html\"\u003eSR Hop Bucking 60º (Purple) - for VSR\/SSG-10\/GBB\/Pistol\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/official-logo-patch.html\"\u003eOfficial Logo Patch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.skirmshop.es\/es\/montaje-de-replica.html\"\u003eReplica assembly and mounting service included\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe pre-upgraded pistol is built to order and may take up to 3 days to assemble, after which it will be shipped to you.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct descriptions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAction Army AAP01:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe AAP01 is a mix of the legendary Ruger-style pistol with a modern design and compatibility with G17 series magazines. The upper and lower receiver are made of durable polymer with metal inserts for the working parts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe lightweight bolt and short-stroke action system provide the user with a satisfying amount of felt recoil as well as a fast cycle, ideal for firing multiple shots on target not only in tactical scenarios but also in sport shooting competitions. The selector switch is accessible after pulling the bolt back.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker AAP01 - TDC + Prowler Hop Plate:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis kit removes all the stock hop-up parts and replaces them with a TDC hop-up function in the standard AAP-01 hop-up chamber.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis set contains a printed TDC cap (ABS) with a grub screw and a specially designed pressure plate for your AAP-01 to adjust your hop-up from the top using a hex key. The vertically finished grub screw presses vertically onto the included Prowler hop plate, providing the best pressure point from true top dead center (TDC).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe red CNC aluminum Prowler nub in this hop plate has the same shape and finish as the well-known purple nub we offer in the SRS Kraken series. This nub shape has received very positive feedback, so we offer the same design for a perfect setup in your AAP-01.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker AAP01 Spring Kit (8 pieces):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis set includes four different recoil springs and four different nozzle return springs to fine-tune your AAP-01 into a monster.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGreen gas, HPA, drum magazines, short magazines, long magazines, short-stroke kit, etc. There are countless possible AAP-01 configurations, and we noticed that each setup behaves differently. Temperature conditions also play an important role in how your AAP-01 performs, so we decided to release a definitive eight-spring set so you can tune your AAP-01 depending on the parts and gas you use and the temperature conditions where you live.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker Morpheus 129MM Inner Barrel for AAP01:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cem\u003eThe Morpheus Hybrid Barrel is made of highly durable SUS304 stainless steel and features a dual-diameter tapered end to improve your range and accuracy.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWe use seamless and more durable SUS304 stainless steel because we wanted to raise the bar. Most brands use welded SUS303 stainless steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is reduced due to its composition, as it is specialized for machining, so the SUS304 steel we use is more difficult to machine but more durable and offers excellent corrosion resistance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStalker SR-Hop Bucking:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Stalker SR-Hop bucking is designed as a hybrid of an R-hop with an extended front section. It features its own perfectly balanced material properties, design, and bucking patch fit for optimal BB flight trajectory performance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have any problems or questions about this or other Stalker products, visit our Stalker Owners Facebook group here: \u003ca href=\"https:\/\/www.facebook.com\/groups\/329589544772075\/\" target=\"_new\"\u003ehttps:\/\/www.facebook.com\/groups\/329589544772075\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: \u003ca href=\"https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\" target=\"_new\"\u003ehttps:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003c\/a\u003e Instagram: \u003ca href=\"https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\" target=\"_new\"\u003ehttps:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003c\/a\u003e Youtube: \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\" target=\"_new\"\u003ehttps:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, tech guides, and builds, visit: \u003ca href=\"http:\/\/www.stalkerairsoft.com\/\" target=\"_new\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eYou can find more information about why we require personal information to purchase airsoft guns here.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Skirmshop Spain","offers":[{"title":"Default Title","offer_id":52551186710869,"sku":null,"price":224.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-32_93e55568-19a3-4381-8b6b-4eb9a932d046.png?v=1771968970"},{"product_id":"tokyo-marui-hi-capa-5-1-dor","title":"Hi-Capa 5.1 D.O.R","description":"\u003cp\u003eHi-Capa 5.1 D.O.R Tokyo Marui\u003c\/p\u003e\n\u003cp\u003eSpecial version of the Hi-Capa 5.1, considered by many players to be the best pistol on the market. This version is ready to mount an RMR, and also features several aesthetic and internal upgrades.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrand: Tokyo Marui\u003cbr\u003eModel: Hi-Capa 5.1 D.O.R.\u003cbr\u003eType: Gas blowback pistol (GBB)\u003cbr\u003eColor: Black and chrome\u003cbr\u003eMaterial: ABS, zinc alloy and aluminum\u003cbr\u003eHop-Up: Yes\u003cbr\u003eBlowback: Yes\u003cbr\u003eMagazine Capacity: 31 BBs\u003cbr\u003eWeight: 839 g\u003cbr\u003eOverall Length: 222 mm\u003cbr\u003eBarrel Length: 112 mm\u003cbr\u003eFiring Mode: Semi-automatic\u003cbr\u003eCaliber: 6 mm BB\u003cbr\u003eMuzzle Velocity: ± 300 FPS\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOTHER FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpecial dual-tone model different from the traditional Hi-Capa\u003cbr\u003eFeatures changes to the nozzle, nozzle housing, slide, and outer barrel compared to the standard Hi-Capa 5.1\u003cbr\u003ePrepared for mounting an RMR (red dot), not included\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBOX CONTENTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Tokyo Marui Hi-Capa 5.1 pistol\u003cbr\u003e1 x 31-round magazine\u003cbr\u003eBag of 0.20 g BBs\u003cbr\u003eCleaning rod\u003cbr\u003eUser manual\u003cbr\u003eColor: Black and silver\u003cbr\u003eThe red dot shown in the image is not included.\u003c\/p\u003e","brand":"Tokyo Marui","offers":[{"title":"Default Title","offer_id":52551795999061,"sku":"SP-TM-26","price":149.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/hi-capa-dor-tokyo-marui_7bf6c1f3-e389-45ef-bf6a-ab1f1da2a281.jpg?v=1771968073"},{"product_id":"tokyo-marui-hi-capa-5-1-stainless","title":"Hi-Capa 5.1 Stainless","description":"\u003cp\u003eThe TM Hi-Capa is one of the most reliable ready-to-use gas blowback pistols, featuring smooth action, excellent gas efficiency, and solid accuracy.\u003c\/p\u003e\n\u003cp\u003eThese Tokyo Marui pistols perform well all year round and are a true workhorse of a sidearm, a proven platform with great upgrade potential and strong aftermarket support.\u003c\/p\u003e","brand":"Tokyo Marui","offers":[{"title":"Default Title","offer_id":52551796621653,"sku":"SP-TM-25","price":139.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/pistola-gbb-hi-capa-51-stainless-tokyo-marui-800x8_11c49cfa-136f-4a72-a597-ebe5cbc6aeb2.jpg?v=1771968070"},{"product_id":"stalker-morpheus-inner-barrel-aap01-129mm","title":"\"Morpheus\" AAP01 Dual Bore Inner Barrel (129 mm)","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05 hybrid dual-bore barrel is designed to offer the airsoft community one barrel to rule them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered crown to improve range and accuracy.\u003c\/p\u003e\n\u003cp\u003eWe use the more durable and robust SUS304 stainless steel because we wanted to raise the bar. Most brands use SUS303 steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is reduced due to its composition, as it is optimized for machinability. The SUS304 steel we use is more difficult to machine but far more durable and offers excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis barrel features an enlarged bridge-less window and is a cross-platform barrel, making it compatible with most AEG, GBB, or sniper rifle platforms. It includes all the well-known side cuts for compatibility with many airsoft guns, as well as Action Army hop-up side cuts. Pairing this barrel with popular VSR buckings is no problem.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (please check the grooves in the photo to confirm if your GBB rifle is compatible with this barrel)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel material: Cold hammer-forged seamless SUS304 stainless steel barrel\u003cbr\u003eInner diameter: 6.05 mm\u003cbr\u003eBarrel crown diameter: ~ 7.80\u003cbr\u003eSurface treatment tolerance quality: 0.001 mm class precision\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, technical guides, and build guides, visit: www.stalkerairsoft.com\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52551905542485,"sku":"SP-STAL-200","price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/img-20200113-201402_3d92dc53-1e98-4cf1-a727-19a71477385c.jpg?v=1771967869"},{"product_id":"stalker-morpheus-inner-barrel-mk23-133mm","title":"\"Morpheus\" Dual Bore Inner Barrel for MK23\/Socom Pistol (133mm)","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05 hybrid dual-bore inner barrel is designed to offer the airsoft community one barrel to rule them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered end crown to improve range and accuracy.\u003c\/p\u003e\n\u003cp\u003eWe use the most durable and resistant seamless SUS304 steel because we wanted to step up the game. Most brands use SUS303 stainless steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is weakened due to its composition, as it is optimized for machinability. The SUS304 steel we use is harder to machine but more durable and offers excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis inner barrel features an enlarged bridge-less window and is a cross-platform barrel, making it compatible with most AEG, GBB, or sniper rifle platforms. It includes all the popular side cuts to be accepted in many airsoft guns, as well as Action Army hop-up side cuts. Pairing this barrel with popular VSR buckings is no problem.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (check the grooves in the photo to confirm whether your GBB rifle is compatible with this barrel)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel material: Cold hammer-forged seamless SUS304 stainless steel barrel\u003cbr\u003eInner diameter: 6.05 mm\u003cbr\u003eBarrel end crown diameter: ~7.80\u003cbr\u003eSurface treatment tolerance quality: 0.001 millimeter class precision\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, technical guides, and build guides, visit: www.stalkerairsoft.com\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52551912292693,"sku":"SP-STAL-193","price":44.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/148a6556_a9dfcf15-918b-4740-b402-3322a38fe3a3.jpg?v=1771967854"},{"product_id":"cow-cow-enhanced-1911-inner-chassis","title":"Enhanced 1911 Inner Chassis","description":"\u003cp\u003eUpgrade your 1911 platform with the \u003cstrong\u003eEnhanced 1911 Inner Chassis\u003c\/strong\u003e by \u003cstrong\u003eCow Cow Technology\u003c\/strong\u003e. Designed for precision and durability, this CNC-machined aluminum chassis replaces the standard polymer or steel inner frame, offering improved structural integrity and a lighter overall weight.\u003c\/p\u003e\n\n\u003cp\u003ePerfect for competitive players looking to reduce weight without sacrificing strength, this part is compatible with standard 1911-style airsoft pistols (including MK23 platforms).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-grade Aluminum for lightweight durability.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Ultra-light 3g construction.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits standard 1911\/MK23 inner chassis dimensions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cow Cow Technology.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CCT-TMHC-116\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3g\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Cow Cow Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eUpgrade your build with precision-engineered parts from Cow Cow Technology.\u003c\/em\u003e\u003c\/p\u003e","brand":"Cow Cow Technology","offers":[{"title":"Default Title","offer_id":52552038809941,"sku":"SP-CCT-TMHC-116","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/1911-inner-chassis-1-jpg-100779-500x500.jpg?v=1771967606"},{"product_id":"stalker-morpheus-inner-barrel-aap01-250mm","title":"\"Morpheus\" Dual Bore AAP01 Barrel 250mm","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05 dual bore hybrid barrel is designed to provide the airsoft community with one barrel to rule them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered muzzle crown to improve range and accuracy.\u003c\/p\u003e\n\u003cp\u003eWe use the more durable and stronger SUS304 stainless steel because we wanted to step up the game. Most brands use SUS303 steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is weakened due to its composition, as it is specialized for machinability. The SUS304 steel we use is harder to machine but more durable and offers excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis barrel features an enlarged bridge-less window and is a cross-platform barrel, making it compatible with most AEG, GBB, or sniper rifle platforms. It includes all the well-known side cuts to ensure compatibility with many airsoft guns, as well as Action Army hop-up side cuts. Pairing this barrel with the popular VSR buckings is no problem.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (check the grooves in the photo to see if your GBB rifle is compatible with this barrel)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel material: cold hammer forged seamless SUS304 stainless steel barrel\u003cbr\u003eInner diameter: 6.05 mm\u003cbr\u003eBarrel muzzle crown diameter: ~ 7.80\u003cbr\u003eSurface treatment tolerance quality: 0.001 millimeter class precision\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, technical guides, and build guides, visit: www.stalkerairsoft.com\u003c\/p\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552198848853,"sku":"SP-STAL-164","price":59.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/img-20200113-201402_ebbca95d-6e92-457d-86d2-8a5a8536a7ba.jpg?v=1771967296"},{"product_id":"stalker-morpheus-inner-barrel-aap01-200mm","title":"\"Morpheus\" Dual Bore AAP01 Barrel 200mm","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05 hybrid dual bore barrel is designed to offer the airsoft community one barrel to rule them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered crown to improve range and accuracy.\u003c\/p\u003e\n\u003cp\u003eWe use the more durable and resistant SUS304 stainless steel because we wanted to step up the game. Most brands use SUS303 steel because it is easier to machine. The corrosion resistance of SUS303 stainless steel is weakened due to its composition, as it is optimized for machinability. The SUS304 steel we use is more difficult to machine but far more durable and offers excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis barrel features an enlarged bridge-less window and is a cross-platform barrel, making it compatible with most AEG, GBB, or sniper rifle platforms. It includes all the well-known side cuts to ensure compatibility with many airsoft guns, as well as Action Army hop-up side cuts. Pairing this barrel with popular VSR buckings is no problem.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and all other systems that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (check the grooves in the photo to confirm if your GBB rifle is compatible with this barrel)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel material: Cold hammer-forged seamless SUS304 stainless steel barrel\u003cbr\u003eInner diameter: 6.05 mm\u003cbr\u003eBarrel crown diameter: ~7.80\u003cbr\u003eSurface treatment tolerance quality: 0.001 millimeter class precision\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and updates on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information about Stalker products, technical guides, and build guides, visit: www.stalkerairsoft.com\u003c\/p\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552199471445,"sku":"SP-STAL-163","price":48.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/img-20200113-201402_80fec5ac-a3d4-4ccf-bf1e-c6e4145df1eb.jpg?v=1771967294"},{"product_id":"stalker-aap01-ultimate-spring-set","title":"AAP01 Ultimate Spring Set (8pcs)","description":"\u003cp\u003eThis set includes four different recoil springs and four different nozzle return springs to tune your AAP-01 into a monster!\u003cbr\u003e\u003cbr\u003eGreen gas, HPA, Drum Mags, Short Mags, Long Mags, Shortstroke kit Etc. There are countless AAP-01 setups possible, and we noticed every setup acts differently. Your temperature conditions also play a big role in how your AAP-01 works, so we decided to release an ultimate set of eight springs so you can tune your AAP-01 based on the parts and gas you use and on the temperature conditions where you live.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis AAP-01 Ultimate Spring Set Contains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1x 110% Recoil Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 140% Recoil Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 180% Recoil Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 200% Recoil Spring\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 140% Nozzle Return Spring \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 230% Nozzle Return Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 315% Nozzle Return Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1x 375% Nozzle Return Spring\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552417902933,"sku":"SP-STAL-145","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/springs1_620b91a9-4108-4bec-b577-227dadc6f592.jpg?v=1771967009"},{"product_id":"stalker-drop-in-prowler-hop-plate-mk23-ssx23","title":"Drop-in Prowler Hop Plate for MK23\/SSX23 Socom","description":"\u003cp\u003eCNC machined Aluminium upgrade to improve range and accuracy as well as replace stock hop arm in the airsoft TM\/STTi\/ASG Mk23 and SSX-23.\u003cbr\u003e\u003cbr\u003eMade with high tolerance and engraved with the STALKER logo this Mk23 Prowler plate offers you an awful lot of advantage when it comes to simplifying the hop-up assembly. All wobbly parts are a thing of the past, an arm can sometimes go skewed because the wheel of your stock Mk23 pulls the arm down on 1 side. With this plate, you ensure that your hop-up plate plus nub is always forced straight down TDC. in combination with the STALKER TDC hood you make sure that the screw of the hood lands right on the center position of the prowler plate and this gives you the best hop-pup effect.\u003cbr\u003e\u003cbr\u003eThe nub shape of this plate is the same as the Prowler nub shape we used on our Kraken SRS Purple Nubs. it has the same shape as most used buckings and after all, proven to work with amazing results in the SRS Kraken.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e***Installation Steps***\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003col\u003e\r\n\u003cli\u003eOpen hop-up\u003c\/li\u003e\r\n\u003cli\u003eRemove hop wheel and stock hop arm and screws.\u003c\/li\u003e\r\n\u003cli\u003eInstall chosen barrel and bucking.\u003c\/li\u003e\r\n\u003cli\u003eClose the Hop assembly.\u003c\/li\u003e\r\n\u003cli\u003eInstall the STALKER Prowler Hop Plate for Mk23 into the hop-up\u003c\/li\u003e\r\n\u003cli\u003eFit the STALKER TDC HOOD onto the hop unit.\u003c\/li\u003e\r\n\u003cli\u003eRebuild your MK23.\u003c\/li\u003e\r\n\u003cli\u003eTest shoot and adjust the hop-up from the top with the grub screw of the STALKER TDC Hood.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFits TM MK23 Hopup\u003c\/li\u003e\r\n\u003cli\u003eFits Novritsch SSX-23 Hopup\u003c\/li\u003e\r\n\u003cli\u003eFits Stti MK23 Hopup\u003c\/li\u003e\r\n\u003cli\u003eFits ASG MK23 Hopup\u003c\/li\u003e\r\n\u003cli\u003eLifts heavy Weight BB's\u003c\/li\u003e\r\n\u003cli\u003eMight work with other TDC Covers\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552434647381,"sku":"SP-STAL-125","price":7.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_16a784a4-e343-4966-8993-040014dee157.jpg?v=1771966837"},{"product_id":"stalker-cnc-aluminium-panthera-nub-aap01-mws","title":"CNC Aluminium Panthera Fat Concave Nub (AAP-01, Kraken, MWS, AEG)","description":"\u003cp\u003e\u003cstrong\u003eCNC Aluminium Panthera Fat Concave Nub (AAP-01, Kraken, MWS, AEG)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe all know the VSR Panthera Nub, widely used in the VSR community, so we designed the Panthera Fat Concave Nub to fit other hop-up chambers such as the Stalker Kraken S3 arm, the AAP-01 CNC wheel hop-up chamber, or the Laylax custom chamber for MWS. This Panthera Fat Nub will likely fit many other chambers as well.\u003c\/p\u003e\n\u003cp\u003eThe shape and dimensions of this nub are designed to work best with VSR-style buckings such as Kraken Concave Bucking, Sr-Hop, Maple Leaf Autobot\/Decepticon, etc., or AEG buckings with an internal patch of approximately 5 mm.\u003c\/p\u003e\n\u003cp\u003eThis package includes 1x CNC Aluminium Panthera Fat Concave Nub (AAP-01, Kraken, MWS, AEG).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases range and accuracy.\u003c\/li\u003e\n\u003cli\u003eCompatible with Stalker Kraken S3 Arm.\u003c\/li\u003e\n\u003cli\u003eCompatible with Action Army AAP-01 Adjustable Wheel CNC Chamber.\u003c\/li\u003e\n\u003cli\u003eCompatible with MWS Laylax Custom Chamber.\u003c\/li\u003e\n\u003cli\u003eMay be compatible with other AEG, sniper, and pistol hop-up chambers. Works best in standard 2J+ setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can follow all my live feeds, photos, and information on my Instagram, Facebook, and YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: \u003ca href=\"https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\" target=\"_blank\"\u003eStalker Airsoft Designs\u003c\/a\u003e Instagram: \u003ca href=\"https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\" target=\"_blank\"\u003estalkerairsoftdesigns\u003c\/a\u003e YouTube: \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\" target=\"_blank\"\u003eStalker Airsoft Designs\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information on Stalker products, technical guides, and manufacturing details, visit: \u003ca href=\"https:\/\/www.stalkerairsoft.com\" target=\"_blank\"\u003ewww.stalkerairsoft.com\u003c\/a\u003e\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552437530965,"sku":"SP-STAL-122","price":10.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-7_0da18797-948d-4db8-9ef6-80fb704d19f3.jpg?v=1771966779"},{"product_id":"stalker-mk23-hop-up-chamber-tdc-hood","title":"MK23\/SSX23 TDC Hood - TM, STTI, ASG, Novritsch","description":"\u003cp\u003eThis affordable kit removes all stock hop-up components and replaces them with an adjustable TDC hop-up function in the stock Airsoft MK23 hop-up chamber.\u003c\/p\u003e\n\u003cp\u003eThe Stalker TDC Hood is precision-engineered and manufactured from factory 3D-printed durable ABS material with a matte black finish, matching the appearance of the Airsoft Mk23 slide. The TDC screw features a flat base that perfectly seats against a flat hop plate.\u003c\/p\u003e\n\u003cp\u003eFeatures \u0026amp; Improvements:\u003c\/p\u003e\n\u003cp\u003eImproved hop-up adjustment on MK23\u003cbr\u003eEnhanced TDC position alignment\u003cbr\u003eOptimized shape to prevent hop-up cap deformation from screws\u003cbr\u003eCompatible with TM MK23 hop-up\u003cbr\u003eCompatible with Novritsch SSX-23 hop-up\u003cbr\u003eCompatible with STTI MK23 hop-up\u003cbr\u003eCompatible with ASG MK23 hop-up\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003c\/p\u003e\n\u003cp\u003e1x Factory 3D-printed ABS TDC hood\u003cbr\u003e1x Flat-bottom set screw\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552445985109,"sku":"SP-STAL-120","price":13.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_1a99865d-7896-4942-9748-760412924c16.jpg?v=1771966679"},{"product_id":"stalker-aap01-accessory-tdc-hole-tool","title":"AAP01 - TDC Hole Tool","description":"\u003cp\u003eDescription\u003cbr\u003eNeed to drill a hole in the top of the AAP-01?\u003cbr\u003eUse this tool to achieve the perfect hole position for installing the Stalker TDC kit.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the top rail (if installed) by unscrewing the 2 screws.\u003cbr\u003eRemove all top components of the AAP-01 as shown in the video below.\u003c\/li\u003e\n\u003cli\u003ePlace the Stalker TDC top rail tool and secure it using the original rear sight screws.\u003c\/li\u003e\n\u003cli\u003eUse a 2mm drill bit and align with the circle hole to drill into the top of the AAP-01.\u003c\/li\u003e\n\u003cli\u003eRemove the Stalker TDC top rail tool from the AAP-01.\u003c\/li\u003e\n\u003cli\u003eFlip the top and drill the 2mm hole with a 4mm drill bit (guide slightly for a perfect center hole).\u003c\/li\u003e\n\u003cli\u003eIf desired, use the same Stalker TDC top rail tool to drill a hole in your rail.\u003c\/li\u003e\n\u003cli\u003eReinstall the rail onto your AAP-01.\u003c\/li\u003e\n\u003cli\u003eAssemble your hop-up and rear top unit together as shown in the video below.\u003c\/li\u003e\n\u003cli\u003eYour AAP-01 is ready for TDC adjustment using an external hex key.\u003cbr\u003eWhat's in the package?\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e1x ABS (acrylonitrile butadiene styrene) plastic TDC tool\u003cbr\u003eYou can follow all my live streams, photos, and info on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: \u003ca href=\"https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\" target=\"_blank\" rel=\"noreferrer noopener\"\u003ehttps:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003c\/a\u003e\u003cbr\u003eInstagram: \u003ca href=\"https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\" target=\"_blank\" rel=\"noreferrer noopener\"\u003ehttps:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003c\/a\u003e\u003cbr\u003eYoutube: \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information on Stalker products, technical guides, and builds, visit: www.stalkerairsoft.com\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552450408789,"sku":"SP-STAL-118","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image-1_37660e52-ff5a-4841-9845-fb549caa82b2.png?v=1771966576"},{"product_id":"stalker-aap01-hop-up-tdc-prowler-plate","title":"AAP01 - TDC + Prowler Hop Plate","description":"\u003cp\u003e\u003cstrong\u003eAAP-01 - TDC + Prowler Hop Plate\u003c\/strong\u003e\u003cbr\u003eThis kit removes all stock hop-up components and replaces them with a TDC hop function integrated into the stock AAP-01 hop-up chamber, allowing you to fine-tune accuracy millimeter by millimeter.\u003c\/p\u003e\n\u003cp\u003eThis set includes a printed ABS TDC cap with a set screw and a specially designed pressure plate for your AAP-01 to adjust hop from the top using a hex key.\u003cbr\u003eThe vertical set screw presses directly onto the included Prowler hop plate, providing optimal pressure from the Top Dead Center (TDC).\u003c\/p\u003e\n\u003cp\u003eThe CNC red aluminum Prowler bump on this hop plate matches the shape and finish of the well-known purple Prowler bump we offer in the SRS Kraken series. This profile has received excellent feedback, so we offer the same shape for perfect performance on your AAP-01.\u003c\/p\u003e\n\u003cp\u003eWhat's in the package?\u003c\/p\u003e\n\u003cp\u003e1x ABS (acrylonitrile butadiene styrene) AAP-01 TDC cap\u003cbr\u003e1x flat-bottom set screw\u003cbr\u003e1x CNC red aluminum Prowler hop plate\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstallation Guide\u003c\/p\u003e\n\u003cp\u003eDisassemble the hop-up unit from the AAP-01 pistol.\u003cbr\u003eRemove all original parts from the black hop-up housing.\u003cbr\u003eKeep the 4 original screws holding the two hop-up halves together.\u003cbr\u003ePlace unused parts in a sealed bag and store them safely.\u003cbr\u003eInstall the barrel and nozzle into the hop-up and close the hop-up unit.\u003cbr\u003eTighten the lower screws and the upper right screw evenly.\u003cbr\u003eTake the remaining screw and insert it into the hole on the TDC cap next to the Stalker logo.\u003cbr\u003eTighten the screw by hand (do not over-tighten); it will thread into the original hop-up unit.\u003c\/p\u003e\n\u003cp\u003eYou now need to drill a hole in the top of the AAP-01.\u003c\/p\u003e\n\u003cp\u003eWe offer the Stalker TDC positioning tool if you're unsure where to drill to align correctly with the TDC.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52552450474325,"sku":"SP-STAL-117","price":16.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_6d27c3fc-7093-4f18-a4bb-265ea6aa908b.jpg?v=1771966574"},{"product_id":"tokyo-marui-hi-capa-4-3-gbb-pistol","title":"Hi-Capa 4.3 Dual Stainless","description":"\u003cp\u003eThe TM Hi-Capa is one of the most reliable ready-to-use gas pistols, featuring smooth operation, excellent gas efficiency, and good accuracy.\u003c\/p\u003e\n\u003cp\u003eThese Tokyo Marui pistols perform reliably year-round and are a true workhorse pistol platform, proven with great upgrade potential and aftermarket support.\u003c\/p\u003e\n\u003cp\u003eThis model is more compact at \"4.3\" inches, making it easier to handle.\u003c\/p\u003e","brand":"Tokyo Marui","offers":[{"title":"Default Title","offer_id":52552464793941,"sku":"SP-TM-13","price":152.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/gp-tm-43custom-lg_418e95ab-4dec-4ff2-b593-35880fcb10b5.jpg?v=1771966330"},{"product_id":"tokyo-marui-hi-capa-5-1-gbb-pistol","title":"Hi-Capa 5.1","description":"\u003cp\u003eThe TM Hi-Capa is one of the most reliable ready-to-use gas pistols, featuring smooth operation, excellent gas efficiency, and good accuracy.\u003c\/p\u003e\n\u003cp\u003eThese Tokyo Marui pistols perform reliably year-round and are a true workhorse pistol platform, proven with great upgrade potential and aftermarket support.\u003c\/p\u003e","brand":"Tokyo Marui","offers":[{"title":"Default Title","offer_id":52552464925013,"sku":"SP-TM-11","price":139.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/tokyo-marui-tokyo-marui-hi-capa-51-government-mode_1935f6ea-cfc5-40c2-b1f9-9643d403545c.jpg?v=1771966326"},{"product_id":"ctm-aap-01-holster-black","title":"AAP-01 High-Speed Holster - Black","description":"\u003cp\u003eThe CTM holster for the AAP-01 is a quick-release holster that can be mounted on a belt and allows you to easily place the pistol to ensure it is stored securely, regardless of whether accessories are mounted or not.\u003c\/p\u003e\n\u003cp\u003eCompatibility:\u003c\/p\u003e\n\u003cp\u003eAction Army AAP-01 Pistol\u003c\/p\u003e","brand":"CTM","offers":[{"title":"Default Title","offer_id":52552465449301,"sku":"SP-CTM-CTM-HTS-0010","price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/ctmcbg-hs-0-01-0001-1l_f3c56710-fc10-49f3-bdc6-e9101d421901.jpg?v=1771966310"},{"product_id":"nine-ball-g-series-trigger-unit-gas-route-seal","title":"Aerodynamic Gas Route Seal for G-Series Magazine (1 Pc)","description":"\u003cp\u003eG Series Magazine Gas Route Seal Aero Packing (1 PIECE)\u003c\/p\u003e\r\n\u003cp\u003e● Internal aero shape reduces gas passage resistance.\u003cbr\u003e● Material with excellent sliding properties \u0026amp; special surface treatment.\u003cbr\u003e● Cold resistant material to reduce gas leak.\u003c\/p\u003e\r\n\u003cp\u003eFits Tokyo Marui G Series Series\u003c\/p\u003e","brand":"NINE BALL","offers":[{"title":"Default Title","offer_id":52552541045077,"sku":"SP-4560329176993","price":9.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/fdfggddd_6ff22e91-df09-4053-a95e-d003cf3dceca.jpg?v=1770869233"},{"product_id":"mp-speedplate-tm-g17-aap01","title":"SpeedPlate for TM G17 \/ AAP01","description":"\u003cp\u003eSpeedPlate for TM G17 \/ AAP-01\u003c\/p\u003e\r\n\u003cp\u003eThe speedplate’s base is made of plastic.\u003c\/p\u003e\r\n\u003cp\u003eThe speedplate’s main part was made of rubber.\u003c\/p\u003e\r\n\u003cp\u003eThese accessories significantly facilitate taking the magazine out of the magazine pouch, especially when you use tactical gloves.\u003c\/p\u003e\r\n\u003cp\u003e contains 3 pieces\u003c\/p\u003e\r\n\u003cdiv\u003e2.11.0.0\u003c\/div\u003e","brand":"MP","offers":[{"title":"Default Title","offer_id":52552542585173,"sku":"SP-MP04009-BK","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/airsoft-hunting-accessory-softair-3pcs-pack-speedp_406408ea-e066-4620-8c8a-7b6e9d5b6928.jpg?v=1771965449"},{"product_id":"cnc-magwell-for-aap01","title":"CNC Magwell for AAP01","description":"\u003cp\u003eThe CNC magwell enables faster reloads and gives your pistol a more voluminous, tactical appearance.\u003c\/p\u003e\n\u003cp\u003eSelectable color variants available.\u003c\/p\u003e","brand":"Action Army","offers":[{"title":"Black","offer_id":52552566735189,"sku":"SP-AAC-79","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53960803254613,"sku":"SP-AAC-94","price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/083f019c-d9d6-4a6b-a265-6b3f5be08cf4_3fa226f2-09fe-48b6-b45e-3af9b40e8b69.jpg?v=1771965137"},{"product_id":"action-army-aap-01-charging-ring","title":"Charging Ring for AAP-01","description":"\u003cp\u003eOne of the two charging handle options, the charging ring gives your pistol a more compact look and easier reloading.\u003c\/p\u003e","brand":"Action Army","offers":[{"title":"Black","offer_id":52552566866261,"sku":"SP-AAC-57","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53977801720149,"sku":"SP-AAC-58","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/u01-010-1_5523854a-e83c-4df5-a95f-42efe1df2f7c.jpg?v=1771965133"},{"product_id":"action-army-cylinder-v2-v3-teflon","title":"Teflon-Coated V2+V3 Cylinder (3\/4)","description":"\u003cp\u003eV2 + V3 (3\/4) cylinder coated with Teflon.\u003c\/p\u003e\n\u003cp\u003eRecommended barrel length: 270 mm to 400 mm\u003c\/p\u003e\n\u003cp\u003eThe cylinder features a Teflon coating that creates a smooth surface for the piston to move back and forth. The side port allows the piston to compress air correctly. This is an easy upgrade for most airsoft replicas seeking maximum efficiency and air compression.\u003c\/p\u003e","brand":"Action Army","offers":[{"title":"Default Title","offer_id":52552569717077,"sku":"SP-AAC-14","price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/a03-002_113379ec-0b31-423c-88da-6dae2a5190f9.jpg?v=1771965086"},{"product_id":"stalker-g-spec-vsr-10-inner-barrel-spacer-set","title":"G-SPEC VSR-10 Air-Flow Inner Barrel Spacer Set (2pcs)","description":"\u003cp\u003e\u003cstrong\u003eG-SPEC VSR-10 Air-Flow Inner Barrel Spacer Set (2 pieces)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique design with front, rear, and side holes.\u003cbr\u003eThick O-rings inside and outside the spacers provide maximum vibration damping, and the dark purple color makes them visually striking. This design also helps reduce internal barrel noise.\u003c\/li\u003e\n\u003cli\u003eThese spacers accept inner barrels such as Stalker Morpheus, Maple Leaf, TNT, Stock barrels, and any inner barrel with an outer diameter between 8.40 mm and 8.60 mm.\u003c\/li\u003e\n\u003cli\u003eFit VSR G-SPEC outer barrels with an inner diameter of ~27 mm or more, such as Maple Leaf or Action Army outer barrels.\u003cbr\u003eAlso compatible with Maple Leaf Whisper suppressor series.\u003c\/li\u003e\n\u003cli\u003eThis spacer set does not include inner barrel screws. We recommend using steel barrels like the Stalker Morpheus steel barrels with these spacers + inner screws. Flat-bottom Stalker inner screws for these spacers are sold separately.\u003c\/li\u003e\n\u003cli\u003eThis set includes 2 spacers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS PRODUCT INCLUDES ONLY 2 SPACERS—THE BARREL IS NOT INCLUDED!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e* Note: Outer barrel diameters may vary slightly between brands and production batches. If spacers are difficult to install, apply a small amount of grease to the outer O-rings.\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52553373286741,"sku":"SP-STAL-27","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/148a8258_60436695-eb7b-4253-9ce9-a180b0f542a2.jpg?v=1771965877"},{"product_id":"stalker-morpheus-dual-bore-inner-barrel-mk23","title":"Morpheus Dual Bore Inner Barrel for MK23\/SOCOM (150mm)","description":"\u003cp\u003eThe Stalker \"Morpheus\" 6.05mm dual-bore hybrid barrel is designed to give the airsoft community a barrel that dominates them all.\u003c\/p\u003e\n\u003cp\u003eThe Morpheus hybrid barrel is made from highly durable SUS304 stainless steel and features a dual-diameter tapered muzzle crown to enhance range and precision.\u003c\/p\u003e\n\u003cp\u003eWe use seamless SUS304 steel because we wanted to elevate the game. Most brands use seam-welded SUS303 steel, which is easier to machine but has weaker corrosion resistance due to its composition optimized for machinability. SUS304 is harder to machine but offers superior durability and excellent corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis barrel features an extended bridgeless window and is a cross-platform barrel, compatible with most AEG, GBB, or sniper platforms. It includes all the standard side cuts for compatibility with many airsoft guns, including Action Army hop-up cuts. Pairing this barrel with popular VSR buckings is no issue.\u003c\/p\u003e\n\u003cp\u003eThis barrel fits the following airsoft systems and others that accept these barrels:\u003c\/p\u003e\n\u003cp\u003eAEG\u003cbr\u003eGBB (check the slot pattern in the photo to confirm compatibility with your GBB rifle)\u003cbr\u003eVSR\u003cbr\u003eSRS\u003c\/p\u003e\n\u003cp\u003eBarrel Specifications:\u003c\/p\u003e\n\u003cp\u003eBarrel Material: Cold-forged seamless SUS304 stainless steel\u003cbr\u003eInner Diameter: 6.05 mm\u003cbr\u003eOuter Crown Diameter: ~7.80 mm\u003cbr\u003eSurface Finish Tolerance: 0.001 mm precision class\u003c\/p\u003e\n\u003cp\u003eYou can follow all my live streams, photos, and info on my Instagram, Facebook, or YouTube channels here:\u003c\/p\u003e\n\u003cp\u003eFacebook: https:\/\/www.facebook.com\/StalkerAirsoftDesigns\/\u003cbr\u003eInstagram: https:\/\/www.instagram.com\/stalkerairsoftdesigns\/\u003cbr\u003eYoutube: https:\/\/www.youtube.com\/channel\/UCWsBiSHlu-lbcnGQWAkeJWQ\u003c\/p\u003e\n\u003cp\u003eFor more information on Stalker products, technical guides, and build tutorials, visit: www.stalkerairsoft.com\u003c\/p\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":52553374335317,"sku":"SP-STAL-92","price":44.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/148a6556_e9a1f2ea-b5d3-4413-8af2-ed4bd56f13b0.jpg?v=1771965858"},{"product_id":"mk23-ssx23-tdc-wheel-kit-hop-plate-tdc-hood-tdc-wheel-tm-stti-asg-novritsch","title":"MK23\/SSX23 TDC Wheel Kit (Hop Plate + TDC Hood + TDC Wheel) - TM\/STTI\/ASG\/Novritsch","description":"\u003cp\u003eThis affordable kit removes all stock hopup parts and replaces them for an adjustable TDC hopup function on the stock Airsoft MK23 hopup chamber. This set upgrade will improve your MK23 range and accuracy.\u003c\/p\u003e\n\u003cp\u003eThe Stalker TDC Hood model is precisely designed and made from strong plastic material and finished in black to get the equivalent looks to the Airsoft Mk23. The TDC screw has a flat bottom that lands perfectly on the island of the Stalker MK23 Prowler Hop Plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTDC Hood Fitment and improvements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved fitment on the MK23 Hopup\u003c\/li\u003e\n\u003cli\u003eImproved alignment of the TDC position\u003c\/li\u003e\n\u003cli\u003eImproved shape to avoid hopup cover deformation by screws\u003c\/li\u003e\n\u003cli\u003eFits TM MK23 Hopup\u003c\/li\u003e\n\u003cli\u003eFits Novritsch SSX-23 Hopup\u003c\/li\u003e\n\u003cli\u003eFits Stti MK23 Hopup\u003c\/li\u003e\n\u003cli\u003eFits ASG MK23 Hopup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the package?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x STALKER MK23TDC Hood\u003c\/li\u003e\n\u003cli\u003e1x TDC Wheel\u003c\/li\u003e\n\u003cli\u003e1x Flat bottom adjustment grub screw\u003c\/li\u003e\n\u003cli\u003e1x STALKER Drop-in Prowler Hop Plate for MK23\/SSX23 Socom (CNC machined Aluminium upgrade to improve range and accuracy as well as replace stock hop arm in the airsoft TM\/STTi\/ASG Mk23 and SSX-23.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e***Installation Steps***\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOpen hop-up\u003c\/li\u003e\n\u003cli\u003eRemove hop wheel and stock hop arm and screws.\u003c\/li\u003e\n\u003cli\u003eInstall chosen barrel and bucking.\u003c\/li\u003e\n\u003cli\u003eClose the Hop assembly.\u003c\/li\u003e\n\u003cli\u003eInstall the STALKER Prowler Hop Plate for Mk23 into the hop-up\u003c\/li\u003e\n\u003cli\u003eFit the STALKER TDC HOOD onto the hop unit.\u003c\/li\u003e\n\u003cli\u003eRebuild your MK23.\u003c\/li\u003e\n\u003cli\u003eInstall the TDC Wheel\u003c\/li\u003e\n\u003cli\u003eTest shoot and adjust the hop-up from the top with the TDC Wheel.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"STALKER","offers":[{"title":"Default Title","offer_id":53755016708437,"sku":"SP-ST-MK23-004","price":24.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/PXL_20260313_113849942.PORTRAIT.ORIGINAL_b4b46dd4-a44c-4b5a-bd7c-43bf078e8110.webp?v=1776955151"},{"product_id":"cow-cow-technology-match-grade-stainless-steel-hammer","title":"Match Grade Stainless Steel Hammer","description":"\u003cp\u003eCNC-machined stainless steel construction designed as a drop-in upgrade for IPSC shooters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTitanium Nitride (TiN) coated finish for enhanced durability and smoother operation\u003c\/li\u003e\n\u003cli\u003eCompatible with TM Hi-CAPA and 1911 platforms\u003c\/li\u003e\n\u003cli\u003eAvailable in selectable color variants\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cow Cow Technology","offers":[{"title":"Rainbow","offer_id":53938027200853,"sku":"SP-CCT-TMHC-119","price":51.95,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53938027233621,"sku":"SP-CCT-TMHC-057","price":40.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53938027266389,"sku":"SP-CCT-TMHC-056","price":40.99,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53938027299157,"sku":"SP-CCT-TMHC-055","price":51.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/hc-hammer-rainbow-1-jpg-100806-500x500_68a684f6-bc1d-4c9a-a95c-ce242b5875b4.jpg?v=1778938114"},{"product_id":"cow-cow-technology-stainless-steel-grip-screw","title":"Stainless Steel Grip Screw","description":"\u003cp\u003eStainless Steel Grip Screw for Hi-CAPA\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUnique look for Hi-Capa grips\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel construction\u003c\/li\u003e\n\u003cli\u003eNinja Shuriken head design\u003c\/li\u003e\n\u003cli\u003eAvailable in selectable color variants\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cow Cow Technology","offers":[{"title":"Rainbow","offer_id":53938036277589,"sku":"SP-CCT-TMHC-130","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53938036310357,"sku":"SP-CCT-TMHC-129","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53938036343125,"sku":"SP-CCT-TMHC-128","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53938036375893,"sku":"SP-CCT-TMHC-127","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/hc-grip-srew-rainbow-jpg-100841-500x500_cdd15d44-9ca2-4ed8-becd-9b83f5b7d67b.jpg?v=1778938296"},{"product_id":"tti-aap-01-drum-magwell-aw-we","title":"AAP-01 Drum Magwell (AW\/WE)","description":"\u003cp\u003eTTI magwell designed to work with WE \/ AW drum magazines for a perfect fit.\u003c\/p\u003e\n\u003cp\u003eCNC metal construction for enhanced durability.\u003c\/p\u003e","brand":"TTI Airsoft","offers":[{"title":"Red","offer_id":53938069995861,"sku":"SP-TTI-11","price":33.95,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53938070028629,"sku":"SP-TTI-10","price":33.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/red-mw2_0a564722-8186-4bda-a02e-b9565c22eaaf.jpg?v=1778939021"},{"product_id":"tti-aap-01-tactical-adjustable-trigger","title":"AAP-01 Tactical Adjustable Trigger","description":"\u003cp\u003eTTI Airsoft Tactical Adjustable Airsoft Trigger for G Series GBB Pistols and AAP-01.\u003c\/p\u003e\n\u003cp\u003eThe trigger is adjustable for trigger pull length, making it ideal for those who love shooting fast or want to try their luck on the competition circuit.\u003c\/p\u003e","brand":"TTI Airsoft","offers":[{"title":"Silver","offer_id":53938070159701,"sku":"SP-TTI-14","price":23.95,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53938070192469,"sku":"SP-TTI-P0001-BK","price":23.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/tti-p0001-bk-800x800_83f5ccda-6992-467d-b806-d0b2f9d8a70c.jpg?v=1778939034"},{"product_id":"tti-charging-ring-with-fire-selector","title":"Charging Ring with Fire Selector","description":"\u003cp\u003eThe TTI Airsoft Charging Ring with Fire Selector for the AAP-01 is an upgraded part featuring a ring-style charging handle for easily racking the pistol. It also includes an exposed selector switch, allowing you to switch between firing modes much faster and in a more convenient way. This upgrade part is very easy to install, lightweight, and durable!\u003c\/p\u003e","brand":"TTI Airsoft","offers":[{"title":"Black","offer_id":53938070258005,"sku":"SP-TTI-04","price":43.95,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53938070290773,"sku":"SP-TTI-03","price":43.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/image_d37ae9ea-afea-4bd4-9f30-8a2f577ed405.jpg?v=1778939050"},{"product_id":"wii-tech-1911-t-marui-cnc-6063-lightweight-blowback-housing","title":"1911 (T.Marui) CNC 6063 Lightweight Blowback Housing","description":"\u003cp\u003eThis CNC aluminum blowback housing (BBU) is manufactured through a precision CNC process. It is specially made for the Hi-Capa 1911 series (T.Marui) GBB airsoft pistol, delivering superior performance for professional and competition needs.\u003c\/p\u003e\u003cp\u003eThe dimensions are based on the original T.Marui blowback housing, and it has been modified with a lightweight design and dual O-ring system to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eincrease cycling speed and recoil response;\u003c\/li\u003e\n\u003cli\u003eimprove gas sealing with the loading nozzle;\u003c\/li\u003e\n\u003cli\u003ereduce recoil impact for better and faster follow-up shots (e.g., double\/triple taps);\u003c\/li\u003e\n\u003cli\u003eensure the loading nozzle stays aligned with the hop-up.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelectable color variants available.\u003c\/p\u003e","brand":"Wii Tech","offers":[{"title":"Black","offer_id":53938073633109,"sku":"SP-4490","price":59.95,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53938073665877,"sku":"SP-4492","price":39.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/files\/4492-0a-850x715_35e97a5d-4ed1-4a74-9e11-60b927d1638f.jpg?v=1778939112"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1024\/3607\/7909\/collections\/image-11_d68d23d4-1dfc-47a7-9de3-b528b2f11c0f.png?v=1779070979","url":"https:\/\/www.skirmshop.es\/en-gb\/collections\/stalker-pistol-platforms.oembed?page=2","provider":"Skirmshop Spain","version":"1.0","type":"link"}