Silverback VKS Complete Guide

Skirmshop field guide · Silverback Airsoft · 2026

The bullpup built
around silence

A compact bullpup precision platform built around a straight-pull spring action, SRS-proven air volume and an unusually serious approach to sound suppression.

Preorder open
01.09.2026
estimated shipping
Catalogue
6 configurations
Black · FDE · Olive Drab
Silverback VKS airsoft rifle in a cinematic field setting
41 ccUsable air volume
350 mmInner barrel
63 + 5BBs magazine + feed path
50 clicksTDC hop range
silverback-vks
Which Stalker parts actually fit the VKS? Silenced or Compact for woodland? How do I set the TDC hop-up?

01A new branch of the Silverback family

VKS design, SRS DNA

The VKS is a 6 mm airsoft sniper rifle inspired by the distinctive VKS/VSSK silhouette, but it is its own purpose-built airsoft platform rather than a one-to-one reproduction. Silverback has returned to its bullpup roots and combined the layout with lessons learned from both the SRS and TAC-41.

The official manual confirms that the spring-powered VKS shares three core mechanical elements with the SRS: the cylinder, piston and spring guide. It also uses the same 41 cc of usable air volume as the SRS and TAC-41. From the TAC-41 side, the VKS adopts a top-dead-centre hop-up concept and a high-capacity magazine philosophy. The result is short where it matters, mechanically familiar to experienced Silverback technicians, and easy to strip without turning routine maintenance into a workshop project.

Shared with the SRSCylinder · piston · spring guide
Inherited from the TAC-41TDC hop-up · high-capacity magazine
Silverback VKS Silenced in Flat Dark Earth on a field equipment table
VKS Silenced · Flat Dark Earth. Scopes and bipods are not included.

02Choose the silhouette

Silenced or Compact?

Both versions use the same 350 mm inner barrel and the same core spring system. The difference is the external sound-management package, overall length and weight. The Silenced model includes Silverback’s full-size VKS silencer; the Compact model keeps the extraordinary 649 mm bullpup footprint.

Silverback VKS Silenced in Black Silverback VKS Compact in Black
Overall length
1,124 mm649 mm
Net weight, spring configuration
4,408 g3,427 g
Inner barrel
350 mm
Front assembly
Full-size VKS silencer, 981 gCompact muzzle configuration
Available colours
Black · Flat Dark Earth · Olive Drab
Best suited to Maximum suppression character and the complete VKS profile. Mobility, vehicles, dense woodland and a minimal footprint.

Interactive 3D preview

Explore the VKS from every angle

Choose Silenced or Compact, then drag to rotate the rifle and inspect the complete profile.

Interactive 3D model of the Silverback VKS Silenced Black

On mobile, the 3D model downloads only when you choose to load it.

Drag to rotate · Scroll or pinch to zoom

Accessories in lifestyle photography: scopes, bipods and other equipment shown in some images are not included unless the product page explicitly says so. Generated field scenes are concept visuals; the studio images in section 03 show the exact commercial colour and version combinations.

03Six official configurations

Every VKS version

silverback-vks
Silverback VKS Silenced in Black
Silenced · Black
SP-SBA-VKS-01BK
Silverback VKS Silenced in Flat Dark Earth
Silenced · Flat Dark Earth
SP-SBA-VKS-01FDE
Silverback VKS Silenced in Olive Drab
Silenced · Olive Drab
SP-SBA-VKS-01OD
Silverback VKS Compact in Black
Compact · Black
SP-SBA-VKS-02BK
Silverback VKS Compact in Flat Dark Earth
Compact · Flat Dark Earth
SP-SBA-VKS-02FDE
Silverback VKS Compact in Olive Drab
Compact · Olive Drab
SP-SBA-VKS-02OD

04Spring-powered straight-pull cycle

How the VKS works

The VKS is operated through a linear bolt movement rather than a traditional rotating bolt. The spring drives a piston inside the 41 cc cylinder; compressed air then accelerates the BB through the hop-up and 350 mm inner barrel. The bullpup layout places this mechanism behind the trigger, preserving full cylinder volume in a remarkably short rifle.

01Prepare safelySet the selector to safe, point the rifle in a safe direction and make sure the barrel path is clear.
02Load and insert the magazineWith the magazine removed, open its fill port, load up to 63 BBs and close it. Insert the front of the magazine first, then rotate the rear upward until it locks. The feed tube holds a further five BBs.
03Open the boltPress the bolt-handle latch and draw the handle straight back approximately 92 mm until the piston engages the sear. With the bolt open, the chamber can be checked safely.
04Close and lockPush the bolt fully forward, release the latch and verify that the handle is locked in place.
05Fire safelyOnly when ready, move the selector to fire, aim at an approved target and press the trigger. Repeat the straight-pull cycle before firing again.
06Unload completelyMove the selector back to its SAFE position, remove the magazine and empty it using the magazine catch. Remember that up to five BBs can remain in the feed path; clear the rifle in a safe direction according to the official manual.
Critical manual warning Never pull the trigger while the bolt is open. The bolt can slam forward and cause damage or injury. Do not overtighten the silencer; thread it clockwise only until it reaches its stop.

05TDC hop-up

One click at a time

The VKS uses a dedicated top-dead-centre adjustment wheel. Each click changes nub pressure by approximately 20 micrometres. Fifty positions provide a total range from 0 to 1,000 micrometres. Silverback also supplies two taller nubs that shift the available adjustment window by approximately +250 or +500 micrometres.

Turn the wheel clockwise to add hop and counterclockwise to reduce it. Start low, fire a controlled group with the BB mass and energy you will actually use, then add hop gradually until the trajectory is stable without climbing excessively. Keep the rifle upright while testing; canting the rifle introduces side spin.

Whenever BB mass, muzzle energy, nub or bucking changes, reset and tune again. Excessive pressure can jam the chamber. Chronograph the rifle after hop changes because the setting can alter measured energy. The chamber, nub, bucking and inner barrel must remain clean and dry.

Nub +250 µmShifts the adjustment window upward
Nub +500 µmFor heavy BBs and higher energy
Official Silverback VKS manual: TDC hop-up adjustment
Official manual: TDC hop-up adjustment. © Silverback Airsoft.

06Sound signature

Built around silence

Silverback describes the VKS as likely to be one of the quietest spring-powered bolt-action platforms currently available in airsoft. That is a manufacturer positioning statement, not an independent laboratory ranking, but the engineering direction is clear.

Muzzle reportAttacked with a very large dedicated volume around a comparatively short 350 mm inner barrel.
Piston impactThe piston and airbrake architecture gives technicians a route to soften the mechanical impulse.
Mechanical resonanceThe rigid bullpup chassis keeps the air system compact and aligned.
Environmental reflectionDepends on the surroundings — not something the rifle controls.

This is why the right premium build is not simply “the strongest spring.” A truly top-tier VKS should balance the air volume, piston mass, cup, airbrake, spring, hop seal and BB weight, then prove the result on a chronograph and in a sound test. Efficiency and impact control are what create a refined rifle.

07Stalker upgrade path

Build the premium VKS

The official VKS manual explicitly confirms shared SRS cylinder, piston and spring-guide mechanics. The official exploded view also identifies SRS-family airbrake and spring-guide part numbers inside the VKS spring assembly. Skirmshop has additionally confirmed a dedicated VKS conversion path for the Stalker hop system: the Stalker chamber works with a small VKS-specific adapter, while the Stalker Morpheus inner barrel and Stalker bucking are compatible. This creates a complete premium air-and-hop upgrade path without implying that every SRS part fits the VKS.

Stalker / SRS component family
Status for VKS
What that means
Stalker Scorpion SRS piston and spring-guide architecture
Supported path
The VKS shares the SRS piston and spring-guide system. This is the logical premium route for adjustable piston mass, cup and airbrake tuning. Final production fit, energy and bolt engagement must still be checked by the workshop.
Stalker Extreme Silent cup and adjustable SRS airbrakes used with the Scorpion system
Supported path
The VKS exploded view uses the SRS airbrake family. These parts are central to controlling piston impact and the perceived mechanical report. Configuration must be matched to barrel, energy and piston mass.
Stalker SRS cylinder
Fitment test required
Silverback confirms shared cylinder architecture, but Skirmshop will not label a specific third-party cylinder “plug and play” until a production VKS has been measured and cycled with it.
Stalker hop-up chamber with the dedicated VKS adapter
Compatible via adapter
A small VKS-specific conversion piece adapts the Stalker chamber to the VKS. The chamber is not a direct fit on its own: the dedicated adapter must be installed as part of the conversion.
Stalker Morpheus inner barrel
Compatible
The Morpheus barrel is part of the confirmed VKS upgrade path. Use the length specified for the production VKS conversion rather than assuming that every SRS barrel length is interchangeable.
Stalker hop-up bucking
Compatible
The Stalker bucking is compatible with the converted Stalker chamber and Morpheus barrel package. Select the final profile and hardness for the rifle’s legal energy, BB weight and intended climate, then tune and chronograph again.
SRS magazines, outer barrels, stocks, handguards, rails and muzzle assemblies
VKS-specific
These belong to different platform geometry. Use only parts explicitly released for VKS.
Important fitment note The Stalker chamber requires the dedicated VKS adapter; it is not a direct-fit chamber without that piece. Skirmshop will publish the exact adapter, Morpheus length and recommended bucking configuration after final production installation, cycling, chronograph and hop testing. This confirmed conversion path is not a blanket guarantee for unrelated SRS parts.
1 · BaselineInspect seal, alignment, bolt engagement and stock energy. Tune the supplied TDC nub before replacing parts.
2 · Air systemValidate the Stalker Scorpion SRS piston, spring guide, cup and airbrake combination in the production VKS.
3 · Hop and barrelInstall the Stalker chamber with its VKS adapter, the correctly sized Morpheus barrel and the selected Stalker bucking as one tuned system.
4 · Prove itChronograph, group-test, cycle-test and compare sound signature before the rifle leaves the workshop.
The parts this path uses
Scorpion piston and spring guide, Extreme Silent cup and airbrakes, Kraken chamber with the VKS adapter, Morpheus inner barrel and a Kraken bucking set.
Adapter and Morpheus length published after testing

08Maintenance that preserves performance

Keep the quiet rifle quiet

  • Keep the hop-up unit, bucking, nub and inner barrel clean and dry. Oil in the hop system destroys consistency.
  • Use only a small amount of suitable lubricant on the cylinder seals and sliding surfaces identified by Silverback. More lubricant is not better.
  • Check the silencer and front assembly for correct seating; stop when the thread reaches its natural end and never overtighten it.
  • Inspect the magazine feed lips, follower and channel. Dirt in the high-capacity double-stack magazine can create intermittent feeding.
  • After any piston, spring, airbrake, seal, nub or hop change, verify bolt engagement, safe operation and muzzle energy before field use.
  • Store the rifle unloaded, uncocked and dry. Remove the magazine and confirm that the five-BB feed path is clear.

Official manual, explained visually

Controls, magazine, hop-up and internals.

Official Silverback VKS manual: silencer installation and safety selector
Silencer installation and safety selector. © Silverback Airsoft; selected manual page reproduced for product education.
Official Silverback VKS manual: 63-BB magazine operation
63-BB magazine loading, insertion, removal and emptying. © Silverback Airsoft.
Official Silverback VKS manual: materials, mass, dimensions and capacity
Official materials, mass, size and capacity table. © Silverback Airsoft.
Official Silverback VKS exploded view: bolt, piston and SRS spring guide
VKS bolt, piston, SRS-family airbrakes and spring guide. © Silverback Airsoft.

These selected diagrams support the guide; they do not replace the complete safety and maintenance instructions. Download the current official manual and exploded views from Silverback before disassembly.

VKS in its element

VKS Compact Black in a night movement concept scene
Compact Black · night movement concept
VKS Compact Flat Dark Earth in a brutalist field concept scene
Compact FDE · urban concept
VKS Compact Olive Drab behind field cover
Compact OD · field-cover concept
VKS Silenced Black in a winter field concept scene
Silenced Black · winter concept
VKS Silenced Flat Dark Earth on field equipment
Silenced FDE · equipment study

09VKS answers

Is the VKS an SRS in a different body?

No. It is a distinct platform with dedicated VKS bodywork, magazine, barrel assembly and TDC hop-up. It shares the SRS cylinder, piston and spring-guide mechanics, which is why selected SRS-system upgrades are relevant.

Will every Stalker SRS product fit?

No. The confirmed path includes the shared piston, spring-guide and airbrake architecture, plus the Stalker chamber when installed with the dedicated VKS adapter, the Stalker Morpheus inner barrel and the Stalker bucking. The chamber is not a direct fit without the adapter. A Stalker cylinder still requires physical production fitment, while SRS magazines and external parts remain VKS-specific.

Is it the quietest airsoft sniper rifle on the market?

Silverback states that it is likely to be one of the quietest spring-powered bolt-action platforms available. We describe it that way until comparative, repeatable sound testing supports anything more absolute.

Does the Compact version lose barrel length?

No. Both official versions use a 350 mm inner barrel. The main difference is the external front assembly, overall length and total weight.

How many BBs does it hold?

The dedicated VKS magazine holds 63 BBs, and the feed tube holds a further five. Always account for those remaining BBs when unloading.

When is the preorder expected to ship?

The current estimated shipping date is 1 September 2026. If the manufacturer schedule changes, the product page will carry the latest date.

Primary sources

Prices, availability and preorder state on this page are read live from the shop. Lifestyle images are concept visuals; the studio photographs show the exact commercial configurations.

silverback-vks
Skirmshop AI