Official Silverback video workshop

Silverback SRS Magazine Follower Swap Guide

This official Silverback video demonstrates how to swap the follower in an SRS magazine, from opening the magazine through refitting the spring and closing the assembly. Use this guide when you need a concise visual reference for identifying the original follower, comparing it with the red replacement follower, and following the sequence shown in the footage.

Complete guide Official video
Primary source
SRS
Official Silverback video workshop
Source-based overview
1:01
Evidence standard
Silverback SRS Magazine Follower Swap Guide
5step by step
1:01Video
6Tools and parts explicitly identified
SRSplatform hub

01Source-based overview

What this procedure does

The sequence begins with the operator using the required 2 mm Allen screwdriver to open the SRS magazine. The magazine shell and top section are then separated so the long follower spring and original follower can be drawn out. The important visual progression is the move from the opened magazine, to the exposed spring and follower, and then to the empty magazine track ready for the replacement parts.

The red follower replaces the original follower. The operator feeds the spring and follower back into the magazine track before closing the magazine. The official description establishes that the video concerns an SRS magazine and that a 2 mm Allen screwdriver is necessary; the footage establishes the order in which the shell, spring, original follower and red follower are handled.

Tools and parts explicitly identified

  • 2 mm Allen screwdriver
  • SRS magazine
  • magazine shell/top section
  • follower spring
  • original follower
  • red follower

Evidence standard

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What the footage makes clear

This walkthrough stays close to the official Silverback source. The expanded notes explain what is visible at each checkpoint, while measurements, compatibility and cautions remain limited to what Silverback actually states.

  • The fixed checkpoints and the chronological handling sequence are taken from the visual review observations.
  • The required tool and SRS magazine reference are taken from the official video description.
  • No official or automatic English or French subtitle track was available.
Specification Source value
Required screwdriver 2 mm Allen screwdriver
Magazine SRS magazine
Replacement follower red follower
What tool does the official video say is necessary?Which tools or parts are identified for Silverback SRS Magazine Follower Swap Guide?

02Primary source

Watch the official Silverback tutorial

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What should I watch for before Open the SRS magazine?Where does the official video show Close the magazine?

03Procedure

Silverback SRS Magazine Follower Swap Guide, step by step

SRS The 2 mm Allen screwdriver is used to open the SRS magazine.
The 2 mm Allen screwdriver is used to open the SRS magazine.
SRS The opened magazine is separated into its shell and top section.
The opened magazine is separated into its shell and top section.
SRS The long spring and original follower are drawn out of the magazine.
The long spring and original follower are drawn out of the magazine.
SRS The red follower and spring are fed back into the magazine track.
The red follower and spring are fed back into the magazine track.
01Open the SRS magazineThe operator uses the specified 2 mm Allen screwdriver to open the SRS magazine. At this checkpoint, compare the frame with the still-closed magazine becoming accessible for separation; this establishes the starting condition for removing the internal parts. Once the magazine is opened, the next view moves to the shell and top section being separated. Video: 00:06 ↗
02Separate the magazine sectionsThe magazine shell and top section are separated, exposing the internal follower path. The important visual change from the previous checkpoint is that the magazine is no longer closed and its internal parts can be reached. Before moving on, the open assembly provides the view needed to draw out the long follower spring and original follower. Video: 00:16 ↗
03Remove the original followerThe operator carefully draws the long follower spring and the original follower out of the opened magazine. Compare the frame with the previous exposed assembly: the spring and original follower are now outside the magazine track rather than seated inside it. This removal leaves the original follower ready to be replaced by the red follower shown later. Video: 00:28 ↗
04Feed in the replacement followerThe red follower is introduced in place of the original follower, and the operator feeds the spring and follower back into the magazine track. The visual checkpoint is the return of these parts to the track after the original follower has been removed. Once the spring and red follower are back in the magazine, the assembly can be closed. Video: 00:39 ↗
05Close the magazineThe operator closes the magazine after feeding the spring and red follower back into the track. Compare this final frame with the separated shell and top section seen earlier: the magazine is closed again and the replacement follower has been fitted inside. This completes the sequence demonstrated in the official video. Video: 00:49 ↗
Checks shown or stated
  • The red follower and spring are back in the magazine track.
  • The magazine is closed.
How do I complete Open the SRS magazine safely?What must I check after Close the magazine?

04FAQ

SRS tutorial questions

What tool does the official video say is necessary?

The official description says that a 2 mm Allen screwdriver is necessary.

Which magazine does this follower swap concern?

The video concerns the SRS magazine.

What replaces the original follower?

The footage shows the original follower being replaced with the red follower.

Complete guide SRSShop the platform: SRS
What tool does the official video say is necessary?Which magazine does this follower swap concern?
0 commentson Silverback SRS Magazine Follower Swap Guide

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.
Skirmshop AI