Official Silverback video workshop
Silverback SRS Sport Magazine Stripdown Guide
This official Silverback video demonstrates how the SRS Sport polymer magazine is opened, stripped down and reassembled. Use this guide when you need to follow the video’s visual sequence: first releasing the magazine, then handling the spring, BB stopper and follower components, and finally using the specified rigid rod as the magazine is closed.
01Source-based overview
What this procedure does
The video begins with the operator pushing the magazine pin so the SRS Sport magazine can be opened. Once open, the long spring, BB stopper and follower components are removed. The fixed checkpoints follow that progression from release and opening through the removal of the internal parts, giving the reader a visual sequence to compare against the footage rather than a separate procedure.
Reassembly is shown through two orientation checkpoints: the BB stopper is presented in its correct orientation, followed by the BB follower. At the final checkpoint, the spring is compressed into the magazine with the rigid rod identified on screen as 4 mm, and the magazine is closed. The official description identifies the subject as the SRS Sport polymer magazine; no additional compatibility or adjustment details are established by the source.
Tools and parts explicitly identified
- 4 mm rigid rod
- SRS Sport magazine
- magazine pin
- long spring
- BB stopper
- BB follower
Evidence standard
Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.
What the footage makes clear
This walkthrough stays close to the official Silverback source. The expanded notes explain what is visible at each checkpoint, while measurements, compatibility and cautions remain limited to what Silverback actually states.
- The official video description identifies the subject as an SRS Sport polymer magazine.
- Visual review observations establish the magazine-pin release, opening, removal of the long spring, BB stopper and follower components, the reassembly orientations, and the final use of the rigid rod.
- On-screen text specifies a 4 mm rigid rod.
- No official or automatic English or French subtitle track was available.
| Specification | Source value |
|---|---|
| Magazine | SRS Sport polymer magazine |
| Rigid rod | 4 mm |
02Primary source
Watch the official Silverback tutorial
Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.
03Procedure
Silverback SRS Sport Magazine Stripdown Guide, step by step
- The SRS Sport magazine is open before the long spring, BB stopper and follower components are removed.
- The BB stopper and BB follower are shown in their correct reassembly orientations.
- The spring is compressed into the magazine with the rigid rod and the magazine is closed.
04FAQ
SRS tutorial questions
What magazine does the official video cover?
It covers the SRS Sport polymer magazine.
What size rigid rod is shown?
The on-screen text specifies a 4 mm rigid rod.
Which parts are removed during the stripdown?
The operator removes the long spring, BB stopper and follower components from the opened SRS Sport magazine.
Share:
Silverback SRS Monopod Installation Guide
Silverback SRS Trigger Preload Adjustment Guide