MDRX Micron - V3 - Negro

Highly realistic in its conception, designed to replicate the construction and features of the original model as closely as possible, integrating a high-quality gearbox capable of delivering high performance in applications ranging from DMR to CQB.

Realistic Construction and Assembly

• Manufactured under exclusive license from Desert Tech LLC.
• Fully engraved markings with a unique serial number.
• Receiver/outer barrel and muzzle brake made of 6000 series aluminum.
• Stock, grip, and handguard made of fiberglass-reinforced PA6 nylon, synthetic rubber buttpad.
• M-LOK handguard, with 2 slots at the 3 and 9 o’clock positions.
• 2 steel QD sling attachment points at the rear of the stock.
• Ambidextrous fire selector and 3-position magazine release.

High-Quality Gearbox

• Wide CNC aluminum cylinder (26mm diameter, +19% wider than standard AEG), featuring a quick spring change design.
• Usable volume of 22.5 cc (with cylinder ported at 75%).
• CNC aluminum cylinder head, NBR piston buffer, stainless steel nozzle.
• Ventilated CNC aluminum piston head, FKM O-ring, POM sliding ring.
• Stainless steel and CNC aluminum spring guide, equipped with thrust bearing. 3-claw design ensuring better axial alignment.
• Tappet plate-less construction.
• CNC aluminum piston body, MIM hardened steel rack with 16 teeth.
• 18:1 torque-up gear set, MIM hardened steel.
• ADC 12 aluminum gearbox shell, 10mm ball bearings.
• High-torque motor with 19,000 RPM neodymium magnets (11.1V), short shaft.

Programmable Electronic Control Unit (ECU)

• Designed to operate with 11.1V and 7.4V Li-Po batteries.
• Electronic Trigger Unit (ETU), programmable Electronic Control Unit (ECU) developed in cooperation with T238.
• Gear cycle detection and fire selector position detection via Hall effect sensor.
• Programmable firing modes (burst/binary), DMR cooldown, rate of fire (ROF) adjustment, pre-cocking, sleep mode, active brake, and battery protection. Also features mechanical lock and MOSFET temperature protection.
• Compatible with brushless motors (with some limitations, see the dedicated USER MANUAL).

Efficient Hop-Up Design

• Hop-up unit made of durable polycarbonate material.
• TCD rotary ring design.
• Incremental "click" adjustments using a ball spring, 36 positions ranging from 0 to 750 µm with the low nub (installed, for standard BB setup), and from 500 to 1250 µm with the high nub (included, for heavy BB setup).
• 330 mm brass inner barrel. 6.05 mm diameter, chemically passivated surface treatment, AEG hop-up cut.
• 70-degree flat hop-up bucking.

The MDRX includes:

• 120-round AR15/5.56 type magazine (standard AEG AR15 magazine format).
• 4 pairs of spacers to adjust magazine play depending on thickness (PA6 nylon material).
• Two additional power springs (*).
• A punch tool for easy battery change and disassembly.
• 2mm and 5mm Allen keys.
• One high nub for the hop-up unit, to lift 0.32g BBs and heavier (low nub factory installed).
• An extra ball spring for the hop-up unit.

Length: 602mm
Weight: 2656g

(*) Depending on airsoft laws and regulations in each country, the type of springs may vary or may not be included. Please consult the online user manual and contact your local store for information. (**) For the German market, the MDRX ECU is permanently locked to semi-automatic; pre-cocking and rate of fire adjustment are disabled.

Black color SKU: SBA-AEG-04BK

Black and FDE color SKU: SBA-AEG-04BKFDE

Full FDE color SKU: SBA-AEG-04FDE