Official Silverback video workshop

Silverback TAC-41 Long Magazine Stripdown and Use Guide

This official Silverback video follows the T41-0600 long magazine from loading and use through complete disassembly and reassembly. It is useful when you need to identify the loading indicator, see how the magazine is inserted into the TAC-41, or follow the demonstrated order for separating and rebuilding its internal parts.

Complete guide Official video
Primary source
TAC-41
Official Silverback video workshop
Source-based overview
4:38
Evidence standard
Silverback TAC-41 Long Magazine Stripdown and Use Guide
5step by step
4:38Video
11Tools and parts explicitly identified
TAC-41platform hub

01Source-based overview

What this procedure does

The demonstration begins with the T41-0600 long magazine being filled through its loading port. The transparent indicator shows the empty state, while the red follower becomes visible through the indicator as the magazine fills. The video then shows the magazine being inserted and used while the replica is supported by the handguard, connecting the loading sequence to its use in the TAC-41.

For the stripdown, the magazine is supported on blocks and a 5 mm pin is used to push the retaining/follower rod. The outer shell and transparent internal body are then separated so the spring, follower and guide pieces can be removed. Reassembly follows the demonstrated order through the centre slot, with the red rod toward the front; the shell orientation is checked before the retaining pins are inserted plain-side first and set flush with the magazine surface.

Tools and parts explicitly identified

  • 5 mm pin
  • blocks
  • T41-0600 long magazine
  • outer shell
  • transparent internal body
  • spring
  • follower
  • guide pieces
  • retaining/follower rod
  • retaining pins
  • replica

Evidence standard

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What the footage makes clear

This walkthrough stays close to the official Silverback source. The expanded notes explain what is visible at each checkpoint, while measurements, compatibility and cautions remain limited to what Silverback actually states.

  • Sequence and visible component details are based on the visual review observations.
  • Magazine model, platform and tutorial scope are supported by the official video description.
  • The fixed checkpoints use the supplied timestamps: 14, 50, 108, 168 and 245 seconds.
  • No official or automatic English or French subtitle track was available.
Specification Source value
Platform TAC-41
Long magazine T41-0600
Official video title TAC-41 - Long Magazine Stripdown & use
Which magazine does the official video cover?Which tools or parts are identified for Silverback TAC-41 Long Magazine Stripdown and Use Guide?

02Primary source

Watch the official Silverback tutorial

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What should I watch for before Fill through the loading port?Where does the official video show Rebuild and set the retaining pins?

03Procedure

Silverback TAC-41 Long Magazine Stripdown and Use Guide, step by step

TAC-41 The long magazine is shown at its loading port, with the transparent indicator providing the visible reference for the follower position.
The long magazine is shown at its loading port, with the transparent indicator providing the visible reference for the follower position.
TAC-41 The magazine is demonstrated in the TAC-41 as the replica is supported by the handguard.
The magazine is demonstrated in the TAC-41 as the replica is supported by the handguard.
TAC-41 The supported magazine is positioned on blocks while the 5 mm pin pushes the retaining/follower rod.
The supported magazine is positioned on blocks while the 5 mm pin pushes the retaining/follower rod.
TAC-41 The outer shell and transparent internal body are apart, exposing the spring, follower and guide pieces.
The outer shell and transparent internal body are apart, exposing the spring, follower and guide pieces.
01Fill through the loading portThe T41-0600 long magazine is filled through its loading port. Compare the transparent indicator with the red follower: the indicator is visible when the magazine is empty, and the red follower appears through it as the magazine fills. Once this change is visible, the demonstration moves from loading to inserting and using the magazine. Video: 00:14 ↗
02Insert and use the magazineAt this checkpoint, the magazine is inserted for use in the TAC-41 while the replica is supported by the handguard. The frame connects the filled magazine to its installed use rather than returning to the loading port. After this use demonstration, the video changes to the supported setup for disassembly. Video: 00:50 ↗
03Start the stripdownFor disassembly, the magazine is supported on blocks and the 5 mm pin is used to push the retaining/follower rod. Watch the pin act on the rod before the outer shell and transparent internal body are separated. This checkpoint leads directly to exposing the spring, follower and guide pieces inside the magazine. Video: 01:48 ↗
04Separate and remove the internalsWith the outer shell separated from the transparent internal body, the spring, follower and guide pieces are removed. The frame shows the internal components as separate pieces rather than as a loaded magazine. Before moving on, compare their removal with the demonstrated rebuilding order through the centre slot. Video: 02:48 ↗
05Rebuild and set the retaining pinsThe internal parts are rebuilt through the centre slot in the demonstrated order, with the red rod toward the front. The shell orientation is checked before the retaining pins are inserted plain-side first. The final visual detail is their position: the pins are set flush with the magazine surface. Video: 04:05 ↗
Checks shown or stated
  • The transparent indicator is visible when the magazine is empty.
  • The red follower appears through the transparent indicator as the magazine fills.
  • The shell orientation is checked during reassembly.
  • The retaining pins are inserted plain-side first and set flush with the magazine surface.
How do I complete Fill through the loading port safely?What must I check after Rebuild and set the retaining pins?

04FAQ

TAC-41 tutorial questions

Which magazine does the official video cover?

It covers the Long Magazine T41-0600 for the TAC-41.

How can the magazine's loading state be seen?

The transparent indicator is visible when the magazine is empty, and the red follower appears through it as the magazine fills.

What is used to begin disassembly?

The magazine is supported on blocks, and a 5 mm pin is used to push the retaining/follower rod before the outer shell and transparent internal body are separated.

Complete guide TAC-41Shop the platform: TAC-41
Which magazine does the official video cover?How can the magazine's loading state be seen?
0 commentson Silverback TAC-41 Long Magazine Stripdown and Use Guide

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.
Skirmshop AI