Official Silverback video workshop

Silverback SRS Buttplate Length Adjustment Guide

This official Silverback video demonstrates how the SRS buttplate length is adjusted by removing the existing spacer arrangement, changing the buttplate spacer(s), and refitting the buttplate. It is useful when you need to follow the SRS-A1 or SRS-A2 adjustment sequence shown in the footage, including the final trigger position that locks the spring in place.

Complete guide Official video
Primary source
SRS
Official Silverback video workshop
Source-based overview
0:47
Evidence standard
Silverback SRS Buttplate Length Adjustment Guide
5step by step
0:47Video
3Tools and parts explicitly identified
SRSplatform hub

01Source-based overview

What this procedure does

The video presents a compact adjustment sequence for the Silverback SRS buttplate. The operator first removes the buttplate and the hollow buttplate spacer, then adds or removes the required buttplate spacer(s). The fixed checkpoints follow that progression from disassembly through the spacer change, so the key visual comparison is the changing spacer arrangement before the buttplate is refitted.

Once the desired spacer arrangement is in place, the operator refits the buttplate. At the final checkpoint, the trigger is pushed and held forward so the piston sear locks the spring in place. The official description identifies the supported models as the SRS-A1 and SRS-A2, while the footage does not show a separate tool or a numeric length.

Tools and parts explicitly identified

  • buttplate
  • hollow buttplate spacer
  • buttplate spacer(s)

Evidence standard

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What the footage makes clear

This walkthrough stays close to the official Silverback source. The expanded notes explain what is visible at each checkpoint, while measurements, compatibility and cautions remain limited to what Silverback actually states.

  • The official video title identifies the subject as Silverback SRS Buttplate length adjustment.
  • The visual review observations establish the removal, spacer change, refitting and trigger-position sequence.
  • The official video description establishes compatibility with SRS-A1 / SRS-A2.
  • The official or automatic transcript contains only music and applause markers and provides no procedural wording.
Specification Source value
Compatibility SRS-A1 / SRS-A2
Which Silverback models does this buttplate adjustment apply to?Which tools or parts are identified for Silverback SRS Buttplate Length Adjustment Guide?

02Primary source

Watch the official Silverback tutorial

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What should I watch for before Remove the buttplate?Where does the official video show Hold the trigger forward?

03Procedure

Silverback SRS Buttplate Length Adjustment Guide, step by step

SRS The buttplate is being taken off to expose the spacer arrangement.
The buttplate is being taken off to expose the spacer arrangement.
SRS The hollow buttplate spacer is separated from the removed buttplate.
The hollow buttplate spacer is separated from the removed buttplate.
SRS The buttplate spacer arrangement is changed before reassembly.
The buttplate spacer arrangement is changed before reassembly.
SRS The adjusted spacer arrangement is covered as the buttplate is refitted.
The adjusted spacer arrangement is covered as the buttplate is refitted.
01Remove the buttplateThe operator begins by removing the buttplate from the SRS assembly. The frame should be compared with the next checkpoint as the buttplate moves away and the spacer arrangement becomes accessible; this establishes the starting point for changing the buttplate length. No separate tool is shown in the footage. Video: 00:13 ↗
02Take out the hollow spacerThe hollow buttplate spacer is removed after the buttplate comes off. At this point, compare the open space and the separated hollow spacer with the previous frame, because the adjustment now moves from removing the original parts to deciding which buttplate spacer(s) remain. The video shows this as the continuation of the disassembly stage. Video: 00:17 ↗
03Change the spacer arrangementThe operator adds or removes the required buttplate spacer(s) to set the desired arrangement. The important visual detail is which spacer(s) are present before the buttplate returns; this is the adjustment itself, and it leads directly to the refitting step. The footage shows no numeric length for the result. Video: 00:22 ↗
04Refit the buttplateWith the required buttplate spacer(s) arranged, the operator refits the buttplate. Compare this frame with the earlier removed-buttplate view: the buttplate is back on and the selected spacer arrangement is no longer exposed in the same way. Once it is refitted, the sequence moves to the final trigger-position action. Video: 00:30 ↗
05Hold the trigger forwardThe operator pushes and holds the trigger forward after refitting the buttplate. The relevant visual checkpoint is the forward-held trigger, which the footage connects to the piston sear locking the spring in place. This completes the demonstrated adjustment sequence. Video: 00:35 ↗
Checks shown or stated
  • The buttplate is refitted after the required buttplate spacer(s) are added or removed.
  • The trigger is pushed and held forward so the piston sear locks the spring in place.
How do I complete Remove the buttplate safely?What must I check after Hold the trigger forward?

04FAQ

SRS tutorial questions

Which Silverback models does this buttplate adjustment apply to?

The official description identifies the SRS-A1 and SRS-A2.

Does the video show a separate tool for the adjustment?

No separate tool is shown in the footage.

Does the video specify a numeric buttplate length?

No numeric length is shown; the footage demonstrates adding or removing the required buttplate spacer(s).

Complete guide SRSShop the platform: SRS
Which Silverback models does this buttplate adjustment apply to?Does the video show a separate tool for the adjustment?
0 commentson Silverback SRS Buttplate Length Adjustment Guide

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.
Skirmshop AI