News

This official Silverback video follows the TAC-41 P feeding system from ramp initialization through magazine loading, repeated cycling and firing, and final ramp emptying. Use this guide when you need to understand what the demonstration shows at each checkpoint, especially the difference between the short magazine reaching zero and BBs remaining in the feeding ramp.

This official Silverback video follows the first assembly of the partially disassembled TAC-41 L/LS, from securing the bolt handle through fitting the stock and outer barrel. Use this guide when checking the assembly sequence, the receiver and barrel relationship, or the recovery of a barrel-clamp nut that has fallen into the stock.

This official Silverback video demonstrates how the two shims beneath the TAC-41 Sport hopup wheel affect preload. Use this guide when you need to identify the small shim under the screw head, the large shim below the O-ring, and the source-defined sequence for removing the wheel, taking out both shims, and reinstalling the parts.

This official Silverback video demonstrates how the handguard attaches directly to the aluminum chassis of the TAC-41 A. Use this guide when you need to follow the installation sequence from the separated upper and barrel assembly, through plate and screw positioning, to handguard alignment and reinstallation of the upper assembly.

This official Silverback video follows the T41-0600 long magazine from loading and use through complete disassembly and reassembly. It is useful when you need to identify the loading indicator, see how the magazine is inserted into the TAC-41, or follow the demonstrated order for separating and rebuilding its internal parts.

This official Silverback video demonstrates how the short front rail is fitted to the TAC-41 polymer stock, from preparing its nylon lugs to checking alignment with the receiver rail. Use this guide when you want to follow the filmed installation sequence and verify the source-defined rail layout, weight, and vertical-alignment details before moving on.

This official Silverback video demonstrates how the long front rail is fitted to the TAC-41 polymer stock, from preparing its nylon-lug hardware through checking the rail against the receiver rail. Use this guide when following the installation sequence or confirming the rail’s alignment, M-LOK layout, stock compatibility and removal requirement before an outer-barrel swap.

This official Silverback video demonstrates how the GBB hopup rubber, socket and inner barrel are arranged in the TAC-41 hopup body, then shows the greasing and reassembly sequence. Use this guide when comparing the five key video checkpoints during a rubber swap, especially when checking barrel retention, the feeding mechanism, hopup alignment and the final adjustment-wheel position.

This official Silverback video demonstrates how the TAC-41 advanced hop-up kit is fitted, from removing the original wheel and nub to reinstalling the hop-up and inner-barrel assembly. Use this guide when you need to follow the filmed installation sequence and distinguish the low-nub and high-nub adjustment ranges supported by the kit.