Official Silverback video workshop

Silverback SRS A1 Spring Change Guide

The official Silverback video demonstrates how to change the spring in an SRS A1 cylinder assembly. This guide is useful when you need to follow that demonstrated sequence from the removed cylinder and original spring through removal, replacement, insertion and closure, while keeping the source-defined spring constraints and official cautions in view.

Complete guide Official video
Primary source
SRS
Official Silverback video workshop
Source-based overview
2:39
Evidence standard
Silverback SRS A1 Spring Change Guide
5step by step
2:39Video
3Tools and parts explicitly identified
SRSplatform hub

01Source-based overview

What this procedure does

The footage begins with the removed cylinder and the parts associated with its spring assembly visible overhead. It then shows the cylinder assembly being opened, the original spring and guide or end components being removed, and a replacement AEG spring being prepared before insertion into the cylinder. The final checkpoint shows the assembly closed again, giving the sequence a clear visual progression rather than a parts list.

Silverback states that the SRS uses an AEG silent piston head type and an AEG spring with an inside diameter bigger than 11mm and a compressed length inferior to 46mm. The official description also cautions that modifying the replica may possibly void the warranty and says to remain compliant with local velocity or muzzle energy regulations after making the change. The video itself does not establish a tool size or torque.

Tools and parts explicitly identified

  • needle-nose pliers
  • T-handle hex key
  • straight rod

Evidence standard

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What the footage makes clear

This walkthrough stays close to the official Silverback source. The expanded notes explain what is visible at each checkpoint, while measurements, compatibility and cautions remain limited to what Silverback actually states.

  • The five checkpoints and the chronological procedure are grounded in the visual review observations at the fixed useful times.
  • The spring type, piston head type, dimensional constraints and compatibility wording are taken from the official video description.
  • The warranty and velocity or muzzle energy cautions are taken from the official video description and opening visual observation.
  • No official or automatic English or French subtitle track was available.
  • The visual review explicitly states not to infer a tool size or torque.
Specification Source value
Platform SRS
Piston head type AEG's silent piston head type
Spring type AEG's spring
Inside diameter bigger than 11mm
Compressed length inferior to 46mm
Which spring does Silverback specify for the SRS?Which tools or parts are identified for Silverback SRS A1 Spring Change Guide?

02Primary source

Watch the official Silverback tutorial

Every technical statement below is restricted to the official Silverback description, subtitles, on-screen text or visible action. Unstated torque values and compatibility claims are intentionally omitted.

What should I watch for before Identify the opened work sequence?Where does the official video show Close the cylinder assembly?

03Procedure

Silverback SRS A1 Spring Change Guide, step by step

SRS The removed cylinder and the spring-change components are arranged in the overhead view.
The removed cylinder and the spring-change components are arranged in the overhead view.
SRS The cylinder assembly is opened so its spring components can be accessed.
The cylinder assembly is opened so its spring components can be accessed.
SRS The original spring and guide components are separated from the opened cylinder.
The original spring and guide components are separated from the opened cylinder.
SRS The replacement AEG spring is positioned inside the cylinder.
The replacement AEG spring is positioned inside the cylinder.
01Identify the opened work sequenceThe overhead frame shows the removed cylinder together with the original spring, spring guide or end components, needle-nose pliers, a T-handle hex key and a straight rod. This is the starting visual reference for the spring change, before the cylinder assembly is opened and its internal spring parts are separated. Video: 00:35 ↗
02Open the cylinder assemblyAt this checkpoint, the cylinder assembly is being opened, moving the procedure from the identified external parts to the spring components inside. Compare the opened assembly with the preceding removed-cylinder view; once it is open, the original spring and its guide or end components can be taken out in the next stage. Video: 00:55 ↗
03Remove the original springThe original spring and the associated guide or end components are removed from the opened cylinder assembly. The needle-nose pliers and straight rod are visible among the handled equipment in this part of the footage, while the T-handle hex key remains part of the displayed setup; the empty spring position leads directly to preparing the replacement. Video: 01:23 ↗
04Prepare and insert the replacementThe replacement spring is prepared and then inserted into the cylinder assembly. The source identifies this replacement as an AEG spring and specifies an inside diameter bigger than 11mm and a compressed length inferior to 46mm; after insertion, the assembly is ready for the closing step shown next. Video: 01:43 ↗
05Close the cylinder assemblyThe final checkpoint shows the cylinder assembly being closed after the replacement spring has been inserted. Compare this closed assembly with the opened view at 55 seconds: the sequence has progressed from the removed cylinder, through removal of the original spring and insertion of the replacement, to the reassembled cylinder shown here. Video: 02:04 ↗
Source-stated cautions
  • Modifying the replica may possibly void your warranty.
  • Make sure you are still in compliance with your local velocity/muzzle energy regulations after this change.
Checks shown or stated
  • The replacement spring is visible inside the cylinder before the assembly is closed.
  • The cylinder assembly is shown closed at the final checkpoint.
How do I complete Identify the opened work sequence safely?What must I check after Close the cylinder assembly?

04FAQ

SRS tutorial questions

Which spring does Silverback specify for the SRS?

The official description specifies an AEG's spring and says the SRS uses an AEG's silent piston head type.

What dimensions does the official description give for the spring?

It specifies an inside diameter bigger than 11mm and a compressed length inferior to 46mm.

What official cautions accompany this spring change?

Silverback says the modification may possibly void the warranty and asks users to remain compliant with local velocity or muzzle energy regulations after the change.

Complete guide SRSShop the platform: SRS
Which spring does Silverback specify for the SRS?What dimensions does the official description give for the spring?
0 commentson Silverback SRS A1 Spring Change Guide

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.
Skirmshop AI